I. Required materials and tools
Cardboard, paper tape (3 colors), pin, compass, glue or double-sided tape.
Second, the steps
1. Draw a circle with a compass of 3cm and 4cm on the cardboard, and then draw a circle with a diameter of 3cm on the circle of 4cm.
2. Cut out this big and small circle.
3. Cut 27 cm paper tape (any color) to make the inner ring of the medal. On the adhesive side of the adhesive tape, fold one third of the width along the dotted line, and then insert it.
4. For the outer ring of the medal, choose a paper tape of another color, cut it into 35cm long, and fold one third of the width inward from one side on the bonding surface.
5. Take a big circle with a diameter of 4cm and stick the adhesive surface of the inner ring tape along the edge of the inner ring.
6. After pasting, push the inner ring adhesive tape forward to form a fold, and then paste it on the edge of the inner ring.
7. The first wrinkle is posted.
8. Similarly, stick continuous wrinkles along the edge of the inner ring.
9. Post it at the end. If there is too much tape left, cut a part and fold it.
10, then open the first wrinkle line and stick the last wrinkle under the first wrinkle.
1 1 for pasting the interior ring.
12, replace the external decorative ring. Turn the pasted medals upside down, stick the outer tape along the edge of the circular cardboard, and then stick it on the inner tape.
13, the pasting method of wrinkles is the same as that of inner ring decoration.
14, decorative appearance of outer ring.
15, turn it over, and the double-fold medal is ready, with a diameter of about 5 square meters.
16, let's start making the medal content, fold it into a small circle of 30m, and write the content and the pattern you want on it.
17. Put a small circle with content in the center of the medal to be read.
18, cut two pieces of adhesive tape with the length of 10 cm, fold them in half respectively, and finally leave about 1 cm of adhesive.
19. After folding and pasting, the length of the two strips should not cover too much.
20. Then stick them on the back of the medal to form an 8-shaped base outside the medal.
2 1. Fold the end of the adhesive tape in half and cut off a small part at an inward angle of 45 degrees to form a dovetail shape.
22. In this way, a beautiful medal was made by hand. As a department of May Day Medal or Class Commendation Medal.
23. If a pin is fixed on the back with adhesive tape, it can be pinned to the child's chest.
24, in addition to using different colors of tape, you can also draw different patterns or write different words in the middle.