What if the toilet has water pressure and no valve?

If there is no valve in the bathroom and the water pressure is high enough, it is necessary to make a temporary water valve to prevent waste or inconvenience caused by the constant scouring of water. The specific steps are as follows:

1. First of all, you need to find the water source of the toilet, usually the water pipe connection. Then turn off the water source and cut off the external water source.

2. It is considered that the pipeline needs to be clamped, so as to achieve the required water pressure and control the water flow. Connect the clip to the water pipe.

3. Install a rotating faucet in the clamp, so that the water flow can be controlled at will. Starting the top screw of the notch can slightly enhance the water flow.

4. Connect the faucet to the button of the toilet tank, turn on the water source to try the effect, and increase or decrease the water pressure as needed.

In a word, if you have a good time, it's only a small matter. The key is to be patient and creative. You may find some surprising things. For example, raising the water level can reduce the sound of flushing.