Introduction to the most common problems in woodworking construction;
1, the woodworking gap is too big.
In the process of woodworking construction, large cracks often appear. This kind of unqualified project not only affects the appearance, but also easily leads to poor splicing and affects the use. Therefore, this issue must be taken seriously.
Solution: there are certain requirements for the seams of wood sealing lines, corner lines and waist line decorative boards. For example, the general seam should not exceed 0.2mm, the seam between the wire and the clamp should not exceed 0.3 mm, the seam between the decorative board and the panel should not exceed 0.2mm, and the overall error of the sliding door should not exceed 0.3 mm. If these values are exceeded, it is best for the carpenter to rework.
2, spelling flowers carelessly
Some workers ignore their own quality problems in order to speed up work efficiency, so the patchwork quality is poor and the closing position is not careful. Some solid wood door cover lines, window cover lines, table top lines, hemming edges and decorative plates are also prone to loose hemming, which affects the appearance and performance. Therefore, woodworking construction should avoid blind operation and ensure quality.
Solution: Woodworking needs to be meticulous, splicing must be seamless and keep a uniform distance; The closing must be tight, firm and flat, and the inner side of furniture doors and wardrobes and the dark side of doors must be closed with solid wood flat lines.
3. Unreasonable storage
The storage of wood materials is very particular. If it is unreasonable, it will easily lead to dryness or dampness. We should avoid putting materials in damp or direct sunlight. In addition, pay attention to it when placing it, and try to avoid vertical placement.
Solution: In order to prevent wood from cracking, the wood transported to the construction site should be cleaned with a dry towel first, and then painted with varnish twice for oil sealing; In order to prevent moisture, wood should be placed in a dry and ventilated place; In addition, all decorative boards should be laid flat, and a large core board should be placed at the bottom of the decorative board, which can keep the board flat.
4, do not pay attention to fire prevention
One of the most common problems in woodworking construction is the neglect of fire prevention. Many people will use a lot of wooden materials when decorating, because wooden materials are more beautiful in shape. However, it should be noted that the problem of fire prevention must not be ignored when decorating with wooden materials, because wood has a low ignition point and is flammable. If you don't pay attention, it may cause a fire and endanger the safety of life and property.
Solution: Pay attention to fire prevention when stacking wooden materials. Generally, there are two methods, one is dipping flame retardant treatment, the other is brushing flame retardant on the surface, and the second is relatively simple and can be completed on the construction site. In addition, it should be noted that fire prevention measures should be taken during wood cutting, the construction site should be far away from sockets and places with open flames, and the garbage such as sawdust generated during cutting should be cleaned up in time.
(The above answers were published on 20 16-0 1-04. Please refer to the actual situation for the current purchase policy. )
Sohu Focus Network provides you with comprehensive information such as real estate information, real estate details, purchase process, owners' forum and home decoration.