First, how is the beautiful seam of ceramic tile made?
Design of reserved width of tile joint: tile joint is generally reserved with a width of 1mm-8mm and a depth of 1mm-2mm. The overall effect of narrow tile joint is good after joint filling, and the three-dimensional effect of wide tile joint is good after joint pointing, with strong layering and easy control of sleeve size error.
Tile reserved joint: positioning cross can be embedded in the joint of tile, which is convenient to ensure the width and width of tile are consistent. Then use ordinary cement or white cement to lay the bottom and fill the joints. After filling, level and compact the joint with wicker to keep the joint depth about 0.5-1.5 mm. ..
Drying period: After the paving and joint filling are completed, the cement material in the joint can be completely dried, and then the jointing construction of sealant can be carried out, and the dust in the tile can be removed with a rag.
Second, two construction methods of ceramic tile caulking agent
1. Construction method: put the caulking agent into the glue gun, and then slowly and forcefully drive the material into the joint. After laying a joint (about 0.2m), first block the nozzle with a wooden wedge, and then immediately scrape off the sealant with a small scraper or finger. The overflow materials on both sides of the brick joint can be wiped off with a wet sponge, and must be wiped off before the sealant solidifies. After each wiping, the sponge should be washed with water for reuse. If the joint width is greater than 3mm and the caulking agent filled into the joint of ceramic tile is relatively uniform, then it is not necessary to scrape the caulking agent and let it level automatically.
2. Leave a gap with a depth of1mm.. Before using sewing thread, clean the dust and other sundries in the seam with a rag or a fine brush. Stick masking paper on both sides of the seam. The texture paper should be about 0.5 mm away from the edge of the gap. Put the caulking agent on the glue gun and drive it evenly along the brick joint. Construction is about 1 m, which should be evenly daubed with fingers or a small scraper immediately; When the masking agent is not cured (about 1 m in construction), the masking paper can be removed conveniently.
From the above, we can know that the beautiful joint of tiles, as the name implies, is to make a fuss about the gap between two tiles, and the specific methods and steps that can be taken, as well as the choice of operation and materials, are relatively rich. Common products include caulking agent for ceramic tiles. You can refer to the above and compare the two construction methods to get reliable operation suggestions. In addition, the use of this beautiful joint operation can also prevent the troubles and losses caused by water leakage of tiles in the later period.
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~