Shantou bazi single winding machine manufactory

The simplest method is to jack up the end beams on both sides and measure whether the rotation speeds on both sides are consistent with each other with a tachometer. If it is inconvenient, you can use a clamp multimeter to measure whether the currents of the motors on both sides are consistent in the same gear. If the above two problems are normal, please don't consider the electrical problems any more.

Mechanical problems include the following: 1: The wear of the driving wheels on both sides is inconsistent, with one side large and the other small. 2. The deflection degree of the main beams on both sides is inconsistent, which leads to the formation of splayed end beams on both sides. Measure whether the diagonal lines of flow are consistent. 3. Due to the long-term use, the track position has deviation, so consider readjusting.

If there are no problems above, please consider asking the crane manufacturer for help, or you can contact me, but there is a charge.

I hope I can help you.