First of all, you need to prepare materials, generally 3 to 4 wool balls, 2 circular needles, 2 12 needle bars, 2 13 needle bars,/kloc-0 sewing needles and more than a dozen marking buttons.
Before formal knitting, it is recommended to measure the size and length of the child. After all, the size of sweaters worn by different fat and thin children is very different, so you should measure the baby's body shape and length first, and then decide the number of stitches.
It's best to knit a sweater sample first and calculate the number of stitches. Because everyone uses different wool thickness and tightness, the sweater knitted with the same number of stitches has different sizes, so it is suggested to knit a sweater sample first, and then calculate the final number of stitches according to the number, size, length and measured baby size of the sample.
In this tutorial, the length and width of the sweater are 33 cm and 25 cm respectively, and the initial number of stitches is 100. Suitable for one-year-old children. If it is a 2-3-year-old baby with a width of 30 cm and a length of about 38 cm, the initial number of stitches should be increased accordingly, but it still depends on the size of your wool. Next is the knitting step:
1, starting: the left hand holds the crochet needle and picks the 1 needle of the thumb from bottom to top, then hooks the 1 needle of the index finger from top to bottom, and then covers the needle of the thumb. Continue to pick needles in this way until the number of needles determined before.
2. The first row of plain knitting (lower knitting), only the upper knitting of one row of knitting (reverse knitting); The first needle in the second row is directly picked out and not knitted, and the rest are knitted (reverse); Continue to weave another row alternately with upper and lower needles like the second row 1, and weave two more rows with plain needles and reverse needles, making a total of six rows.
3, change the big needle, then knit, 1 needle directly take off the needle without knitting. This time, both sides were flat knitted, and two rows were knitted.
4. Hang a mark button at the left and right 8 stitches as a mark of cardigan access control. 1 needle or not, 2-6 needles flat knitting. Then sew the sixth needle on the fifth needle and the seventh needle on the fifth needle. In this case, you can leave an entrance buttonhole, and the rest are knitted. The plain needle continued to knit the 1 thread, and the first stitch was still unfinished, and it was knitted to the buttonhole position, and the two stitches subtracted from the previous buttonhole were added around the 2 thread.
5. There are 4 rows of upper and lower stitches, but the front and rear access control of 8 stitches is front and rear full knitting, that is, plain knitting.
6. Knitting needle: After knitting 8 stitches of the entrance guard, you should add needles. First, knit with two needles and needles, and continue to knit the original two needles. Next, every 2 stitches, so a total of 42 stitches were added.
7. Then no knitting, except the doorman (knitting the next needle), all other knitting is reversed. Continue to alternate plain stitches and reverse stitches and weave three rows, a total of four rows, and then weave all the stitches in three rows.
8. Weave four rows of plain stitches and reverse stitches, and then add stitches, but this time add one stitch every three stitches. Four rows of flat knitting and three rows of flat knitting after needle addition. There were 184 stitches after this injection.
9. Continue to knit a group according to step 8. When you add needles, you still add a row every three needles. However, when knitting the thirty-second row, it is necessary to keep the buttonholes as in the fourth step, and add the number of buttonholes when knitting back. This time, 240 stitches were added.
10. The collar is knitted, with a total of 240 stitches, and then the number of stitches is marked. The front piece is 39 stitches, the back piece is 70 stitches and the sleeve is 46 stitches.
1 1. knit the first line of the front piece first, all of which are flat needles; Take off the sleeves that are not woven for the time being; Then take another thread to weave the back piece, first knit flat needles, and then alternately knit 12 rows.
12, the front and back panels are connected together: the stitching of the front panel is wound with 10 stitching, and then the sleeve panel is partially put aside and woven with the thread of the front panel to the back panel.
13. Remove the sleeve piece on the other side with a sewing needle. Then use 10 needle to wrap the knitting wool of the back piece, and then weave it from the back piece to the other front piece.
14, then knitting, alternately knitting up and down, it should be noted that the entry and exit control of sweaters are all flat needles, and a buttonhole should be left every 32 rows. Make it the expected length, about 80 lines.
15, change to a smaller needle and weave the threading needle, that is, the upper needle and the lower needle weave alternately, without adding needles or reducing needles, thus weaving 16 rows or 20 rows.
16. Close the bottom edge: knit 1 needle, then knit the next needle, put the first needle over and knit all the time.
17. Sleeve weaving: first select eight stitches, then select the additional 10 stitch for winding, plus the original 46 stitches. The sleeve here is 64 stitches.
18. When knitting sleeves, mark the button in the middle of the fifth row. It is necessary to combine the two needles into one to reduce the number of needles. After that, two stitches will be reduced every ten rows. The sleeves are woven to a certain length, about 80 rows. The cuffs are woven with 20 rows or 16 rows of single thread, and finally the bottom edge is hemmed (see step 65438 for details).