1, measure the size first.
2. Then clamp the measuring place with a clamp.
3. Then put the long one on the left and the long one on the right. Take the measured one as the right one of the center line, wrap it around the left from the center line and press it on the left line, as shown in the figure.
4. Then the left line passes through the right line from the middle line and is tightened.
5. On the other side, in the same way, first go around the left line from the middle line to the right.
6. Then bypass the right line from behind the left line and go out to the left red line from the front of the middle line, as shown in the figure.
7, tighten, a knot will be done.
8. Repeat the above steps.
9. Take off the clip, put the other end through this hole and fasten the strap.
1 1, a red bracelet is finished!
Note: When knitting the red rope bracelet, please note that if it is worn by men, it can be tightened, and if it is worn by women, it can be loosened.