Let's take a piece of PE thread, which is about 16 ~ 18 cm, that is, the length of a tie, fold it in half, stick two pieces of PE thread on it, tie a figure-eight knot, and then cut off the extra thread. At the folding end, pass through an anti-entanglement bean, then pass through a space bean, and push the anti-entanglement bean and the space bean down to the splayed joint.
The second step is to make a main line double finger buckle.
After we fold the tail end of the main line in half, we first tie an 8-shaped knot, then make a double finger buckle, put the finished PE tongue buckle into the tongue around the finger buckle, and then pull the PE line and the main line hard.
Step three, lock the pole with space beans.
Loosen the limit bean and the anti-winding bean, then cover the T-shaped head rod with the tongue buckle of the PE line, so that the PE line tightly covers the groove of the T-shaped ring, and then push the limit bean tightly. Then push the anti-winding beans upward to lock the space beans, so that the space beans on the PE line tongue buckle will be completely locked, resulting in the whole tongue buckle firmly locked on the T-shaped ring tip.
Main lines, Chinese words and pinyin are zhǔ xiàn, which means lines that dominate or mainly lead the development of things, especially the main clues of the content of works. Refers to the main line welded in the gun body and plays a cooling role. Generally divided into water cooling (water cooling pipe) and air cooling (trachea).