Workshop Team Leader Safety Production Responsibility Letter

Responsibility letter for workshop team leader for safety production (selected 10 articles)

In today’s social life, more and more places need to use the letter of responsibility, and the letter of responsibility is in accordance with the regulations A system established for assessment, rewards and punishment based on work standards. Many people must be worried about how to formulate a responsibility letter. The following is a safety production responsibility letter for workshop team leaders (selected 10 articles) that I have carefully compiled. It is for reference only. You are welcome to read it.

Workshop Team Leader’s Safety Production Responsibility Letter 1

1. Implement the instructions and requirements of the enterprise and the workshop on safety production, and be fully responsible for the safety production of the workshop.

2. Organize employees to learn and implement various safety production rules and regulations and safety technical operating procedures of enterprises and workshops, educate employees to abide by laws and regulations, and stop violations.

3. Organize and participate in workshop safety activity days and other safety activities, insist on talking about safety before class, inspecting safety during class, and summarizing safety after class.

4. Responsible for providing on-the-job (team-level) safety education to new workers (including interns and agency training personnel).

5. Responsible for workshop safety inspection, organize efforts to eliminate unsafe factors in a timely manner, and report to superiors. Keep detailed records, participate in accident investigation and analysis, and implement preventive measures.

6. Carry out inspection and maintenance of production equipment, safety equipment, fire-fighting facilities, protective equipment and first-aid equipment to keep them in good condition and operating normally. Supervise and educate employees on the rational use of labor protection supplies and appliances, and the correct use of fire extinguishing equipment.

7. Conduct team and team safety production competitions, commend advanced workers, and summarize experience.

8. Do a good job in workshop construction and improve workshop management level. Keep the production site neat and clean, achieve civilized production, and do a good job in ideological and political work in the workshop.

Note: This responsibility letter is made in duplicate, with each legal person and workshop holding one copy.

Seal of corporate legal person: Workshop leader:

Signing time: Year, month, day Workshop Team Leader Safety Production Responsibility Letter 2

In order to conscientiously implement the "Safety Regulations" 1. The safety production policy of "prevention first, comprehensive management", comprehensively implement the safety production target responsibility system, improve the safety awareness of all employees, and achieve the goal of everyone paying attention to safety, everyone managing safety, everyone ensuring safety, and everyone taking a strong A sense of responsibility and a high degree of responsibility for the purpose of doing a good job in safety production, safeguarding the legitimate rights and interests of employees and ensuring the safety of corporate machinery and equipment and other property, successfully completing various production tasks, and signing a safety production responsibility letter.

1. Seriously study and strictly abide by various safety production rules and regulations, and eliminate all violations of safety production rules and regulations.

2. Strictly implement safe operating procedures, do not operate in violation of regulations, do not violate labor disciplines, and correctly use and care for labor protection supplies and other safety facilities.

3. Carefully carry out post self-examination and self-correction work, and solve problems in a timely manner

4. Maintain the tools, appliances, equipment, etc. used to ensure safety, reliability and Use it correctly to keep the work site clean and convenient.

5. Cooperate with each other during the work process, remind each other, handle and report safety problems in a timely manner, and nip hidden dangers in the bud.

6. Actively participate in various safety production education and training activities, proactively put forward suggestions for improving safety work, immediately discourage and stop violations of regulations, and promptly report unsafe hazards to leaders for processing.

7. For those who neglect their duties or work irresponsibly and cause certain consequences, the company will deal with them seriously according to the severity of the case until they are held criminally responsible.

8. If an accident occurs, the scene should be protected as much as possible, report to the workshop director immediately, and truthfully introduce the accident situation, and do not deal with it privately.

Workshop leader: Safety Responsible Person:

Date: Workshop Team Leader Safety Production Responsibility Letter 3

As the first person responsible for the blast furnace workshop, he must During the process, the safety of employees at each position is ensured, the safety of equipment is ensured during normal operation, and human-made accidents are reduced.

I solemnly promise at work:

1. Conscientiously implement the relevant national and superior production safety regulations, systems, and operating procedures, implement production safety technical operating procedures, and strictly guard against the "three violations" (illegal command, illegal operation, Violate labor discipline) and achieve "three no harms" (do not harm yourself, do not harm others, and do not be harmed by others).

2. Responsible for communicating, implementing, and executing various production safety plans, rules and regulations, rectification plans, etc. issued by the company. Based on the actual situation of this workshop with many dangerous factors, formulate relevant safety management regulations, safe production operating systems and safety technical measure plans for each position.

3. Conduct workshop safety education and team safety education for new employees on the 5th and 15th of every month. Provide regular safety thought, safety awareness and safety technology education to employees, organize assessments at the end of the month, and actively participate in various safety activities organized by the company.

4. Strictly implement the company’s distribution and use standards for labor protection supplies, heat-relieving drinking water and other matters, strengthen the management of safety protection equipment, keep them properly and use them correctly.

5. Adhere to the "four no-misses" principle for accidents in the workshop (when investigating and handling work-related accidents, we must insist on not letting go if the cause of the accident is unclear, and if the person responsible for the accident and the masses have not been educated, we must not let go) , Failure to take practical preventive measures will not be ignored, and the person responsible for the accident will not be punished). If an emergency occurs, report it to the leader in charge and the Safety Supervision Department as soon as possible and actively deal with it, find out the cause, and take preventive measures.

6. Be familiar with the unsafe factors of each position in the workshop, promptly remind on-the-job personnel of the precautions, immediately rectify the discovered safety hazards, and promptly report major hazards to the leaders in charge and relevant departments for resolution. Don't conceal or report, otherwise you will be responsible for the consequences.

7. Organize each team leader to conduct a safety production inspection on the 10th of every month, identify potential accident hazards in the operation of safety facilities and equipment at each position, and report to superiors in a timely manner to take corrective measures.

8. On the 6th and 16th of every month, organize the team leaders of the workshop to conduct general accident investigations, assign qualified safety management personnel for each class and group, and formulate relevant safety management systems to achieve safe production Institutionalization and standardization.

9. Be familiar with the operation of all equipment of various types of work in the workshop, master the production skills of employees, regularly strengthen training and education for workers, improve employee quality, improve their safety awareness, and improve their ability to prevent unexpected accidents disposal capabilities to ensure personal safety and equipment safety.

10. Organize the workshop class and team leaders to hold a regular safety production meeting at 8:30 every morning to summarize and analyze the safety production situation. Never shirk responsibility or delay the resolution of problems for any small matter.

11. If an accident occurs due to your illegal command, illegal operation, violation of labor discipline or violation of the above commitments, you are willing to accept the following punishments from the company or superiors:

1. Because of your own If general burns, scalds, cramps, bruises, falls, crushes, mild gas poisoning and other minor injuries caused by illegal command, we are willing to accept a fine of 20% of this month's salary.

2. If a serious injury or disability occurs due to illegal command, a fine of 30% to 50% of this month's salary will be accepted.

3. If a major accident occurs, accept the veto of this month’s salary and wait for the company to handle it.

Leader in charge xx Workshop Director xx

Deputy Director xx

Workshop Team Leader’s Safety Production Responsibility Letter in May 20xx 4

In order to conscientiously implement the policy of "safety first, prevention first", do a good job in the company's safety production work in 20xx, strengthen the company's internal safety management, implement the unit responsible person's safety production responsibility system, ensure the completion of the safety control indicators issued by superiors, and ensure To ensure the safety of the life and property of the company and all employees and reduce the occurrence of accidents and occupational diseases, in accordance with the "Production Safety Law of the People's Republic of China" and other laws and regulations related to production safety, in accordance with "Managing production must manage safety" and "Who is in charge" Based on the principle of "who is responsible", a responsibility letter for safety production goals in 20xx was specially formulated.

1. Work goals:

1. The number of safety accidents is "0".

2. Occupational disease accidents are “0”.

3. Injury accidents are “0”.

4. The rectification rate of safety hazards reaches 100%

5. The discharge of "three wastes" meets national standards, and there are zero pollution accidents.

6. Various health standards stipulated in laws and regulations

2. Work tasks:

The workshop director is fully responsible for the safe production of the workshop. The deputy director shall be responsible for the safety production in the workshop when designated by the director. Responsible for safety work within the scope of work, and their responsibilities are:

1. Ensure that national and superior safety production regulations, systems, and instructions are implemented in this workshop. Put safety work on the agenda and achieve "five simultaneous actions."

2. Organize and formulate workshop safety management regulations, safety technical operating procedures and safety technical measure plans.

3. Organize workshop safety education and team safety education for new employees, conduct regular safety thought, safety knowledge and safety technology education for employees, organize regular assessments, organize team safety day activities, and learn in a timely manner Correct opinions from workers.

4. Organize all workers in the workshop to conduct regular safety inspections to ensure that equipment, safety devices, fire protection, protective equipment, etc. are in good condition.

5. Organize various safety production activities. Summarize and exchange safety production experience, and commend advanced teams and individuals.

6. Strictly implement the relevant distribution standards for labor protection supplies, health food, refreshing drinks, etc. Strengthen the management of protective equipment and educate employees to keep it properly and use it correctly.

7. Adhere to the "four no-misses" principle, promptly report and handle accidents in the workshop, pay attention to protecting the site, identify the causes, and take preventive measures. Propose handling suggestions to those responsible for the accident and submit them to the competent department and factory director for approval before implementation.

8. Organize the workshop safety management network, equip qualified safety management personnel, support the work of workshop safety officers, and give full play to the role of team safety officers.

3. Supplementary Provisions

1. This letter of responsibility is valid for one year, namely: January 1, 20xx to December 31, 20xx.

2. This Letter of Responsibility is made in duplicate, with each party holding one copy.

Signature of the person in charge of the Safety Production Office:

Signature of the responsible person:

Year Month Day Workshop Team Leader Safety Production Responsibility Letter 5

In order to strengthen the company's production safety and on-site management, implement the production safety responsibility system, prevent or reduce the occurrence of various production safety accidents, and ensure the smooth progress of all our company's work, the company has signed an XXXXX annual safety production target responsibility letter with your department.

1. Work indicators

1. Prevent the occurrence of general accidents and strive to prevent accidents. If more than ordinary accidents occur, the decision will be vetoed with one vote, and the corresponding responsible persons will be held accountable.

2. Minor injuries or economic accidents with property losses not exceeding 2,000 yuan shall not exceed 3 persons.

3. Keep the environment of the production site and jurisdiction area clean and sanitary, so that the work is completed, materials are clean, and the site is clear.

4. Safety facilities and equipment must be 100% intact and must not be used casually. Production equipment and key parts are not good at starting fire and using electricity. When fire and electricity are needed, the procedures for starting fire and electricity must be strictly followed.

5. Smoking and drinking are strictly prohibited in the workplace, and people who are drunk are not allowed to enter production positions.

6. Put an end to illegal command, illegal operation, and violation of labor disciplines, and do three no harms to eliminate potential accidents.

7. Establish and improve the workshop safety production management system, files and records, and improve the safety management network of the department.

8. Safety work must be planned, arranged, measured, inspected, recorded, and fed back, and all records must be kept complete.

9. Complete the company's safety work plan on time, do a good job in secondary safety education and training for workshop employees, actively participate in various safety activities organized by the company, actively put forward safety rationalization suggestions, and continuously improve labor and working conditions.

10. The unsafe factors identified by the company and the hidden danger rectification projects assigned should be actively completed within the specified time. During the rectification period, reliable and effective measures should be taken to avoid the occurrence of safety accidents. .

11. Post operators must wear corresponding labor protection equipment when entering the site to ensure that the wearing rate of labor protection equipment is 100%.

12. Continuously improve the environment of dusty and toxic workplaces, with a 100% pass rate for dusty and toxic workplaces, and a 100% occupational disease prevention rate.

13. Report accidents in a timely manner, do not report late, lie or conceal accidents, and actively organize or cooperate with accident investigations.

2. Rewards and punishments:

1. Units that fully complete the indicators in the year-end general evaluation will be commended and rewarded. The workshop will select one advanced safety worker. Depending on the nature of the work department, each person will be given a reward of 200 to 500 yuan, which will be given together with the year-end bonus.

2. Those who fail to meet the targets will be criticized and punished, or even disqualified from the safety evaluation. (The key assessment indicators are the completion of indicators and the accident rate. If there is a fine, the fine will be deducted from the year-end bonus, and the department head will be held accountable at the same time)

3. If an accident is not reported in a timely manner or conceals it, In addition to being severely punished for the responsible persons, the department's qualifications for awarding first-rate awards will be revoked.

4. If you fail to rectify in time after receiving the "Hidden Hazard Rectification Notice", you will be fined 50 yuan for each item; if you start a fire or use electricity without applying for a "fire or electricity license", you will be fined 50 yuan for each item. A penalty of 100 yuan will be deducted.

5. After the accident, those who leave their duties without authorization and do not actively cooperate will be subject to financial penalties depending on the situation, and it is recommended that the company impose administrative sanctions.

6. When a production safety accident occurs, the workshop should actively organize rescue and properly handle the aftermath. The accident handling expenses should be advanced by the company. If necessary, it can be withdrawn from the production safety risk deposit. For responsible accidents, while holding the relevant responsible persons accountable, they must also be given certain financial penalties.

7. Actively carry out rescue operations during accident emergency rescue, and individuals with outstanding achievements will report to the company for commendation and rewards.

8. If there is a change or adjustment in the leadership of the workshop during the year in which this responsibility letter is performed, the successor will continue to perform it. Otherwise, if an accident occurs, in addition to fully assuming responsibility for the accident, the qualification for the workshop award will be cancelled. It is also recommended that the company impose administrative sanctions on the person in charge of the workshop.

Any violations of the above indicators will be punished in accordance with relevant regulations. If the indicators are exceeded, the year-end general evaluation will be cancelled, and penalties will be imposed in accordance with regulations.

3. All departments must conscientiously study and implement the safety production policy, constantly improve the safety production responsibility system, and implement the responsibilities of the workshop director as the first person responsible for safety production in the workshop. The workshop director is responsible for the comprehensive safety production work in the workshop. Be responsible, work tirelessly to prevent accidents, take effective measures from various aspects such as organization, ideology, management, technology and systems, and do a good job in workshop safety.

Company person in charge (signature):

Production supervisor (signature):

Year, month, day, workshop team leader’s safety production responsibility letter 6

< p> In order to strictly implement various rules and regulations on production safety, do a good job in labor protection, improve the self-protection awareness of all employees, and prevent and eliminate accidents and violations, the company signed a "Production Safety Responsibility Letter" with all employed employees. (hereinafter referred to as the "Responsibility Letter") for compliance.

1. Obey the command and management of the company leaders and on-site person in charge, and do not operate in violation of regulations. Have the right to stop others from violating regulations, and have the right to refuse instructions that violate safety labor protection regulations and safe operating procedures.

2. Comply with all safety operating procedures. It is strictly prohibited to bring fire into the factory area. It is strictly prohibited to operate under the influence of alcohol. It is strictly prohibited to work fatigued. It is strictly prohibited to work without training or safety education. It is strictly prohibited to smoke outside the smoking area. Violators will be dismissed.

3. On-the-job training for production lines, printing machines, die-cutting machines, molding machines and special equipment shall not be less than 50 hours (certificates are required for special types of work). After the training, employees can only take up the job after being evaluated and approved by the production line supervisor and the director of the production department and signing a relevant labor contract.

4. Strict labor discipline, no one is allowed to work without permission, and no one is allowed to play, joke or engage in other things unrelated to the work content while working, so as to "do not harm yourself, do not harm others, and do not be hurt by others." "Injury", it is strictly prohibited to bring irrelevant personnel into the factory.

5. Employees in all production positions are prohibited from wearing loose clothing such as skirts, robes, and shawls. Employees engaged in operating machines should not have long hair or wear jewelry to prevent the risk of entanglement. That is: wear work clothes (buttoned, trouser legs and cuffs cannot be rolled up), and female employees wear work caps.

6. All employees are strictly prohibited from walking or playing on the rolling bed; it is strictly prohibited to use rolling bed carts (ground cows) to pull or push people; and it is strictly prohibited to put hands into pockets when working.

7. If a work-related accident occurs or causes injury to others due to personal violations at work, in addition to taking full responsibility for the accident, if it causes property damage or injury to others, financial compensation or penalties will be given depending on the circumstances. Until criminal liability is investigated and cleared from the factory.

8. Actively participate in various safety activities, and the company will give appropriate rewards to teams and individuals who have done well in safety work. The company will give special rewards to employees who discover major safety hazards.

9. For any dangerous situations or minor accidents caused by personal negligence during production, the company will, depending on the circumstances: warn, discipline, punish, or expel.

10. Individuals who maliciously damage the company's equipment or property or cause significant losses to the company's equipment or property due to violation of the company's safety system will not only bear corresponding compensation, but will be held legally responsible for serious cases.

11. Employees who go out for personal matters shall bear their own safety responsibilities. When leaving the factory for more than two hours, take the initiative to fill in the factory departure registration form at the guard duty station.

12. Only those who have signed the "Responsibility Letter" and can abide by the safety regulations can work on duty. Those who have not signed the "Responsibility Letter" will not be allowed to work. If an accident occurs, all economic losses will be borne by the company. Personal responsibility.

13. This "Letter of Responsibility" is in duplicate and will take effect from the date of signature. The company can entrust the on-site person in charge to sign the contract with the employee and supervise its implementation.

Unit (Signature): Employer (Signature):

(Stamp) On-site person in charge:

xx year xx month xx day xx year xx Safety Production Responsibility Letter of the Workshop Team Leader on xx Day 7

Team: □ Class A □ Class B □ Class C □ Class D (indicated by √)

Position: Squad Leader

Responsible person:

In order to protect the personal safety and health of employees, further strengthen employees’ sense of responsibility, prevent the occurrence of various major accidents, and ensure the safe and stable operation of production, To comprehensively do a good job in safety production management in our workshop, we have signed the following:

1. Safety production work target responsibilities

1. Put an end to personal injury accidents, employee death accidents, and minor accidents every year There are zero injuries, poisonings and employee illnesses.

2. In accordance with the system requirements, safety inspections and accident hazard rectification work are carefully carried out. The rectification rate of accident hazards reaches 99%. First, if rectification cannot be made, effective monitoring measures must be taken to ensure safety.

3. Strictly implement various safety operation ticket systems; eliminate any unsafe behavior and prohibit any illegal operations and illegal command behaviors.

4. Strengthen employee safety education, and the pass rate of employee safety education reaches 100%; the rate of employees who require certificates to work is 100%.

5. The passing rate for indicators such as dust, poisons, and noise in production posts reaches over 85% respectively.

6. Put an end to major fire accidents and explosions.

7. Put an end to traffic fatal accidents involving more than the main culprits.

8. Eliminate liability accidents in production operations.

9. Prevent equipment accidents involving major or higher liability.

10. Safety equipment is complete and easy to use, and maintained regularly.

11. Carry out safety team activities regularly.

2. Assessment instructions:

1. The term "safety" in the responsibility letter includes production safety, fire safety, infrastructure safety, etc.

2. After signing this responsibility letter, Party B shall implement the safety target responsibility letter according to the specific conditions of the unit.

3. Assessment standards:

1. For each serious injury, 300 yuan will be deducted for the individual, 300-500 yuan will be deducted for the team, and 10 yuan of the unit fine will be deducted for the main person in charge of the workshop. ‰;

2. For each minor injury or poisoning, 200 yuan will be deducted for the individual, 200-300 yuan for the team, and 10‰ of the unit fine will be deducted for the main person in charge of the workshop;

< p> 3. For every general safety accident, 100 yuan will be deducted from the individual and 100-200 yuan will be deducted from the team. For every 10,000 yuan increase in the economy, 100 yuan will be deducted from the team and the main person in charge of the workshop will be deducted 10‰ of the unit fine;

IV. Other instructions:

1. This letter of responsibility will take effect after being signed by both parties. During this period, if Party B changes, the heir will continue to be responsible and no other liability letter will be signed.

2. This letter of responsibility is interpreted by the Catalytic Workshop Office.

Party A: Party B:

Workshop team leader’s safety production responsibility letter on xx, xx, 20xx 8

As the person in charge of the machine repair workshop, it is the responsibility of the safety production The first responsible person, in order to be responsible for the safety of the company and the employees in this workshop, guarantees and solemnly promises:

1. Ensure that national and superior safety production regulations, systems, and operating procedures are implemented in this workshop, and ensure safety Put work on the agenda, strictly prevent "three violations" and achieve "three no harms".

2. Responsible for conveying, implementing and executing all relevant production safety plans, rules and regulations and implementation plans issued by the company.

3. Organize workshop safety education and team safety education for new employees, and actively participate in various safety activities organized by the company.

4. Organize the workshop team leader or some employees to conduct regular safety inspections to ensure that equipment, safety devices, fire protection, protective equipment, etc. are in good condition.

5. Strictly implement the relevant standards for the use of labor protection supplies, strengthen the management of protective equipment, and educate employees to keep it properly and use it correctly.

6. Be familiar with the unsafe factors and unstable mental state of employees in the unit, and ask employees on the job to pay attention at any time. If safety hazards are discovered, they should be rectified immediately, and those that cannot be rectified should be reported to the leader in charge for disposal.

7. Be familiar with the operation of the equipment, understand the employees’ ideological trends, living conditions and production skills, take timely measures to solve the problems, nip all safety accidents in the bud, and ensure personal safety and equipment safety.

8. Organize team leaders to hold regular production safety meetings every Monday, Wednesday, and Friday to praise those who are advanced and warn those who are lagging behind.

9. If an accident occurs due to illegal command, illegal operation, violation of labor disciplines or violation of the above commitments, I am willing to accept the following penalties from the company:

1. General burns, For scalds, burns, cramps, bruises, falls, crushes, mild gas poisoning and other general liability accidents, we are willing to accept a fine of 50% of this month's salary; 2. Serious injury or disability accidents due to illegal command, Willing to accept all fines from the company. 3. If a major accident occurs, you will be fined for vetoing the monthly salary and will be dealt with by the relevant superior department.

Leader in charge xx Machine Maintenance Director xx

Workshop Team Leader Safety Production Responsibility Letter 9 in May 20xx

According to the "People's Revolution of the People's Republic of China and the National According to the "Safety Production Law", in order to ensure the implementation of safe production in our company, a safety production responsibility system has been established. The responsibilities for safe production in this position are clearly defined as follows:

The director of the boiler workshop is the first person responsible for safe production in this workshop. A responsible person is fully responsible for the safe production of the workshop.

1. Promote and implement the laws, regulations, policies, systems and work requirements of superior departments and the company regarding production safety, environmental protection, and public security, and conscientiously implement and deploy various safety work.

2. Combined with the actual situation of this workshop, sign a safety responsibility letter with each section to implement the safety production responsibility system.

3. Inspect and urge employees in this workshop to consciously perform their safety responsibilities during production and work, strictly implement safety operating procedures, and ensure that they do not violate rules or disciplines.

4. Conduct regular safety inspections in the workshop, promptly implement rectifications of discovered safety hazards, and promptly take corresponding measures for those that are unable to rectify and report to the manufacturing department.

5. Actively complete the rectification of hidden accident hazards assigned by the manufacturing department on time.

6. Report all types of accidents in a timely manner and actively cooperate with the investigation and handling of hidden dangers in accidents.

7. Regularly hold regular workshop safety production meetings to study the safety production situation in the workshop, organize and carry out safety production activities, and apply advanced safety technology and management methods.

8. Organize regular and irregular safety inspections at the workshop level to ensure that equipment, safety protection devices, and protective facilities are in good condition, and rectify hidden dangers in a timely manner. If the workshop is unable to rectify, it must take temporary emergency safety measures and promptly Report to the company in writing.

9. Organize or participate in on-site protection, investigation and handling of various accidents in the workshop, and report them in a timely manner as required.

10. Responsible for the daily safety education and operational skills training of employees in the workshop, organize and implement workshop-level safety education, supervise and supervise the inspection of section and team-level safety education, and conduct regular assessments.

11. Frequently check the implementation of the safety production management system in this workshop, resolutely stop violations of rules and disciplines, and ensure that you do not give orders in violation of rules.

12. When there is a conflict between production and safety, production must obey safety.

13. Responsible for formulating safety technical measures in the workshop and implementing the safety production responsibility system in the workshop.

14. Carry out safety education and training in a planned manner to continuously enhance employees’ safety awareness and self-protection capabilities.

15. Regularly organize safety inspections, and take active measures to rectify and prevent potential accident hazards and unsafe factors to ensure the safe operation of production.

16. Organize the safety work of our company's major, medium and minor electrical repairs, formulate corresponding safety inspection plans, and strictly follow the operating procedures.

17. Manage the company’s electrical equipment and facilities well, conduct regular maintenance and inspections to ensure their reliable performance and intactness, and eliminate fire hazards in a timely manner.

18. For accidents that occur in the workshop, we must carefully organize investigations according to the principle of "four no-misses", analyze and identify the causes in a timely manner, formulate prevention and improvement measures, and report them.

19. Severe electric burns and fatal accidents are zero. Substation power outage accidents are <0.5 times/year, and major accident losses are zero. The second and third level education and training rate and pass rate reached 100% respectively, and the accident hazard rectification rate reached 100%.

20. The employment rate of employees with certificates is 100%, the "three-level" safety education rate is 100%, and the safety facilities and electrical equipment integrity rate is more than 95%.

This responsibility letter will take effect after signing. The person responsible for safety production has understood the above safety production responsibility requirements and promised to be responsible for safety accidents in the management area. If a safety accident occurs due to poor management, Willing to assume corresponding legal responsibilities.

1. For those who neglect their duties or work irresponsibly and cause certain consequences, the company will deal with them seriously according to the severity of the case until they are held criminally responsible.

2. If major safety hazards in the area cannot be rectified in time or cause major safety accidents due to poor management, the relevant responsible personnel shall be punished in accordance with the State Council's "Provisions on Administrative Liability for Extraordinary Safety Accidents" and "Safety Production" Administrative sanctions will be imposed according to the relevant provisions of the Law; if a crime is constituted, criminal liability will be pursued in accordance with the law.

3. This responsibility letter is valid for one year

Signature of the enterprise legal person (official seal):

Responsible person: Workshop team leader Safety Production Responsibility Letter 10 < /p>

According to the "Production Safety Law of the People's Republic of China and the State", in order to ensure the implementation of production safety in our company, a production safety responsibility system has been established. The responsibilities for production safety in this position are clearly defined as follows: < /p>

1. Assist the production supervisor to comprehensively manage the safety work of the production department, implement the relevant national laws and regulations on production safety and the company's safety production system, and take full responsibility for the safety and health of workshop production employees in production.

2. Be familiar with relevant occupational safety laws, regulations and standards, be familiar with the content and requirements of the safety management system, and ensure that the production process complies with safety-related laws, regulations and standards.

3. Participate in the formulation of safety operating procedures for each position in the production workshop, participate in the formulation and implementation of equipment safety operating procedures and production process technical regulations.

4. Direct production in strict accordance with the production safety management system and safe operating procedures, and eliminate all behaviors that ignore production safety, neglect duties, violate regulations, and violate regulations.

5. While formulating the production plan, plan safety work and supervise the implementation. Regularly educate employees on labor discipline, rules and regulations, safety knowledge, and operating techniques.

6. Adhere to the system for special operators to hold certificates for employment. Special circumstances must undergo training and assessment, and be reported to the factory manager and deputy factory manager for authorization before they can operate independently. Provide on-the-job safety education and operational training to new employees and transferred employees, and keep records of training disciplines.

7. Frequently inspect the production equipment, tools and safety facilities at the workplace in the workshop, organize and organize the workplace, and eliminate hidden dangers in a timely manner.

8. Ensure the normal operation of the fire protection equipment system, implement the fire protection responsibility system, and achieve an organic combination of civil defense and technical defense.

9. Educate and urge employees to wear personal protective equipment according to the characteristics of each job type. Those with dust hazards must wear protective masks or gas masks. Smoking is prohibited in the production area, and eating food is prohibited in the production site. Supervise Carry out environmental cleaning work in the production area.

10. Organize and implement employee safety education, safety training and regular safety meetings effectively, ensure the time for safety education and training, and actively participate.

11. When work-related injuries, equipment accidents or near misses occur, they should be reported promptly and truthfully to the general manager and the safety department, organize rescue operations, protect the site, assist the safety department in investigating and handling the accident, and Develop improvement measures.

12. Implement the pre-shift meeting of the production team, regularly organize and hold weekly workshop safety production meetings, organize team safety activities, support the work of the safety department, and solve the problems raised in a timely manner, or in accordance with the prescribed authority Report.

13. Actively participate in and lead subordinates to participate in safety training and activities

General Manager: Production Assistant:

Year, month, day, year, month, day;

p>