What is the use of factory feng shui?
What is the use of factory feng shui? A prosperous career is not only related to the feng shui of the home but also of the office. What should be placed at the door to keep the family healthy and healthy? Auspiciousness also depends on Feng Shui. Choosing a house on that floor will make people live more comfortably. Of course, Feng Shui cannot be fully believed, but only half-believed. I have compiled the Feng Shui knowledge and taboos of factory building Feng Shui. What is the use of factory building Feng Shui 1
1. Selection of height of terrain: Flat terrain is the best choice for building land, but if the terrain is high on one side and low on the other, Feng Shui The front is low, the back is high, the hero is wealthy, and whether it is the front or the back is determined by planning. If it is the front, it is the front, and if it is the back, it is the back. This fully reflects the importance of our Feng Shui. Generally speaking, it is better to open the main door on the lower side. It is better to sit with the higher side facing upwards and the lower side facing downwards.
2. Environment around the plot: There are some special environments around the optional plot, such as mountains, lakes, rivers, railways, highways, high-voltage lines, garbage dumps, hospitals, cemeteries, etc. Land plots near high-voltage lines, garbage dumps, hospitals, and cemeteries must be carefully selected. Of course, if there is no choice, plots near the above-mentioned locations can also reverse the Feng Shui situation after going through the planning and layout of the factory area. However, Therefore, the planning of the factory area may be restricted. When the selected building plot is near lakes, rivers, green spaces, parks, woods, etc., this plot can be said to be the best choice in terms of architectural Feng Shui.
3. Selection of the shape of the plot: There are many shapes of plots, which vary widely. Generally speaking, they are nothing more than square, trapezoid, triangle, irregular form, etc. Square plots are more Ideal for construction land, trapezoidal plots are also good if the location is appropriate. Triangular and unplanned plots should be avoided as much as possible. What is the use of factory Feng Shui 2
Factory Feng Shui knowledge Problems with the factory Feng Shui environment
1. The factory door is in the southwest, facing the viaduct, with large traffic flow and fast speed. , so the fortune is unstable, the main operator is unlucky, ups and downs, and changeable.
2. The Lian Zhen fire evil position in the southeast is where the small oil refining tank is located. The evil star is tall and sovereign, and it will It will have an impact on the overall Feng Shui pattern, and bad people will cause trouble. .
3. The southwest direction is the dry direction, which is the location of the three-story office building. It is originally auspicious, but there is an old building in front of the building, and the height is exactly in front of the operator's office. , called "teardrop killing" in Feng Shui, represents mourning, dilapidation, decline, and poverty.
4. The southwest direction is the dry direction, and the position is empty, which is not good for the main leaders. It is also difficult to manage because of the villains who cause chaos.
5. In the external environment in the southeast direction, there is a circular railway passing by, and the terrain is high and flat, and the distance is very close.
Feng Shui Orientation of Factory Building
The location of the factory building: The factory is sitting on a mountain, which means it can rely on it, and facing the stars, which is energetic. It is a prosperous mountain and a prosperous place, so that the factory can have a large number of people. Prosperity and abundant financial resources. That is to say, there is high ground behind the factory, or there are buildings, and there is water (river, road, etc.) in the direction of the factory gate. It is relatively open, low and flat, or it is a parking lot, park, square, etc., which is a wide open hall and a flood of money.
Factory site selection Feng Shui
1. The factory site should be selected in urban areas; this type of factory is suitable for high-tech, technology- and capital-intensive, small land area, and free of noise, air, and water pollution. technology industry. The advantages are: very convenient transportation, good information, easy introduction of talents, low transportation costs, etc. Disadvantages are: high land and labor costs, many restrictions, and easy relocation due to urban planning and other reasons.
2. Choose a factory site in the suburbs; this type of factory site has the strongest applicability and has various advantages of a downtown site. It is also suitable for labor-intensive enterprises, and the land cost and labor cost are also low, and there are restrictions. Relatively few, it is an ideal location for a factory.
3. Choose a factory site in the countryside; there are many situations for such factory sites, including being far away from the city, docks, train stations, and roads, water supply, and power supply, which should be analyzed separately. This type of factory is suitable for labor-intensive and polluting industries. The advantages are: low land cost, low labor cost, close to raw material production, low quality requirements for workers, and easy recruitment. There are also many disadvantages: high sales and transportation costs, small amount of information, poor traffic conditions, frequent water and power outages, etc.
The advantages and disadvantages of the above analysis are that in terms of geographical location, it is not that locations with more disadvantages are not suitable for factory site selection. This should be determined according to the nature of the factory. For example, there are many advantages in choosing a location in the city center, but if your factory is a labor-intensive enterprise, it is not suitable. It is more suitable to arrange it outside the city or in the countryside. Consideration should be given to raw materials, labor supply, marketing, land costs, and the investment environment. Whether the supply of raw materials is guaranteed, freight rates, whether skilled workers or heavy manual workers needed for production can be recruited, whether market sales are favorable, etc. are all factors that should be considered when selecting a factory location.
At the same time, whether you can buy or rent suitable land for your factory, and whether the land price and house price are reasonable are all important conditions that must be considered when selecting a location. Another very important premise is the investment environment (including hard environment and soft environment) where the factory is located. The hard environment mainly refers to whether transportation is convenient, whether electricity demand is guaranteed, and whether water supply, water sources, and sewage discharge can meet the requirements.
The soft environment mainly refers to whether the government pays attention to it and provides a relaxed environment. For example, whether there are preferential tax treatment, whether administrative charges have been canceled or reduced, whether there are arbitrary charges and apportionments, whether government agencies are efficient, whether there is the bad habit of "eating, taking, getting stuck, and asking for things", and of course whether the local folk customs are strong. , the quality of the public security situation, etc.
How to look at factory building Feng Shui
1. Determine the direction and sitting direction of the gate
Place a compass in the center of the base within the wall to see where the gate is located direction. After the orientation is decided, consider the direction of the door. Outside the gate, avoid electric pillars, house corners, temple ridges, back roads, chimneys and other physical hazards. The direction of the gate is determined by the Qi of the original water (including pond water, entrance, and crossroads). It is necessary to make the Gua Qi pure and unmixed. It is advisable to choose the direction of the door to get the order by taking advantage of the yuan, which is called [facing the first star as the handle of disaster and blessing]. When setting up a gate, you must adapt to local conditions and do not stick to the dead tactics. In addition, you must also pay attention to:
1. The application of the coming water and Qi mouth combination [city gate tactics]. For example, if water comes at the end of the seventh movement, you can set up the Renshan Bing direction. , when the water reaches the end of the star, seven is the order star, and if it is arranged upward, nine is the anger, which is in line with the application of "Chengmen Jue".
2. The former is also the Dragon God, and the back is also the Dragon God. As in the previous example, place the compass in the middle of the gate to measure the incoming water (or intersection, pond, subject to the range visible to the eye) and look at its center point. If the water comes at the end and Kun comes, it is the front and the dragon god. The gate should be upright. Renshan Bingxiang and Ziwu. If Ding comes at the end, and Dragon God comes after him, the gate should be erected in the direction of Renshan Bing and Haiji.
2. Determine the office and factory building
After the direction of the door is decided, place the compass in the center of the base in this direction, and take off the star chart according to the direction of the mountain and direction (water). Life, prosperity, decline and death are arranged.
1. For students in Shanpan, Wangfang builds offices, factories, employee residences, and makes rockeries, etc.
2. Only when water is flourishing can a pool be built, leaving passages, doors and open space. In addition, drainage ditches should also be arranged here.
The office is the decision-making and control center, and the main body of the factory. The building is taller than other buildings, and the door of the factory should be on its side. (Measure with the office take-off star, look at the steering wheel, and place the disk in the center of the office.) The internal chairman's room, manager's room, staff office, conference room, exhibition room, computer room, treasury, etc. must be arranged in the production area of ????the mountain pan. Wangfang or auxiliary side. Passages (moving lines), large windows, side doors, back doors, air-conditioning vents, fish tanks, stairs, elevators, etc. should be placed on the active or auxiliary side of the steering wheel.
The concept of the factory building is the same as that of the office. It is also based on the orientation of each factory building, using Yuan Yuan to take off the stars, and focus on the heavy and practical parts, such as tool room, main machine, motor room, and studio. The equipment such as the mountain plate and star in the factory building are prosperous and helpful.
The imaginary part of the move is placed on the direction of the steering wheel where the star is prosperous or auxiliary.
How to layout a factory in Feng Shui
Site selection for building a factory is very important
Site selection for a factory is very important in Feng Shui. The main issue when building a factory is site selection. So The choice should be decided based on the project being operated. It does not mean that the closer to the city, the better. The current general rule of feng shui for factory buildings is that there are no obvious conflicting elements around the location, such as mainland direct connections, knife-shaped mountains, three-way intersections, power towers, etc. Furthermore, there should be no miscellaneous atmosphere around, such as cemeteries, prisons, temples, etc.
The internal layout of the factory must be reasonable
The office building should be in a financial position or a prosperous position in the entire factory area. The internal layout of the office requires more attention. The boss’s office must be in a prosperous position. In terms of position, the area must be large. The offices of deputies or high-level officials should be distributed on both sides of the boss's office, which is smaller than the boss's office. This is equivalent to the left and right guardians. The financial room should be above the financial position of the office, and the window should be oriented to receive external funds.
The door of the factory building must be in the most prosperous position
The door of the factory production workshop must be in the most prosperous position, and the important and frequently operating machines in the room should be distributed in the direction and sky of the air. Good medical position. The office belonging to the workshop must be above the financial position in the workshop, otherwise it will affect the normal operation of the machine. The correct placement of the factory location can boost business and improve fortune.
Indoor compartments should be suitable and have sufficient sunlight
The compartments laid out in the factory should be of appropriate size, and the transportation lines should be smooth. In particular, the lighting must be sufficient. In addition to the fluorescent lighting in the main places, some Dark corners should also be illuminated with light bulbs to allow air to circulate throughout the factory area. This way employees can work smoothly and safely.
Precautions for Factory Feng Shui
Factory Feng Shui is slightly different from general home Feng Shui. For the facade beautification and Feng Shui layout of the factory, follow the shifting, reducing, and increasing methods. The method is to improve the appearance, facade, pattern, color, etc. of the building to achieve the effect of promoting wealth. Or you can use mascots and evil-controlling objects to replenish, regenerate, and transform the energy, which can help to keep the house safe, seek good luck and avoid evil, and create a new atmosphere.
The key points to consider when it comes to factory feng shui are the following:
1. Whether the location is good: good buildings, whether the nearby buildings on the left and right are coordinated or digested, Moreover, the location must be good and the transportation must be convenient.
2. The appearance of the building: for example, the facade is sleek and elegant, the color of the tiles on the outer wall is appropriate, the glass is bright, and the building has a noble and generous style.
3. Spiritual Wall: The name of the building should be elegant and wealthy, and the logo or name of the building should be kept fresh and bright. The entrance hall and spiritual wall should be three-dimensional and energetic.
4. Factory layout: The partitions should be of appropriate size and the access lines should be smooth. The lighting should be sufficient. In addition to fluorescent lamps, light bulbs should be used in corners to allow airflow throughout the room.
5. Basement: Generally, basements are more suitable for warehouses, factories, restaurants, and are not suitable for the chairman's office, general manager's office, stock companies, etc.
6. Mascots to create evil spirits : Mascots include ingots, God of Wealth, lucky stones, vases, God of Peace and Wealth Talisman, etc. Evil objects such as Tai Chi diagrams, Bagua diagrams, stone lions, etc. A mascot is something that you can feel very friendly and blessed when you see it. You can put more mascots in the room, but you can only specialize in one or two of them to control evil.
7. Indoor plants: Although plants are yin, they can bloom and bear fruit outdoors, which means there is yang in yin. Bringing plants indoors can indeed be of great help to the human body's physiology and psychology.
8. Others: such as the layout of financial position, etc.