Question 1: How to draw the Glodon awning. Whether it is steel bars or graphics, it is recommended to calculate it directly by hand. If the steel bars are not exactly the same single component, it is also recommended to calculate it directly by hand. However, it is recommended to use ring beams or similar components to make the beams or flanges of the awning. It is generally recommended to use ring beams or shear walls. I used to use railings when I first started building, then shear walls for a while, and now I use ring beams. The main thing is that shear walls and masonry walls cannot be drawn overlapping, and ring beams do not matter.
Question 2: How can the Glodon awning be drawn into boards and railings? You can define it arbitrarily in the drawing as long as it is only the concrete engineering quantity. The steel bars are generally made of slabs and railings. Matching, or single construction input
Question 3: How to draw the Guanglian Dali awning. I know that first make the cast-in-place slab and then the ring beam. How to define the ring beam? 1. There is no ring beam in this screenshot. The awning directly uses WKL as the support;
2. In the steel bars, the awning plates and flanges are directly made of sporadic components in single components, and the corresponding node patterns are selected;
3. In the graphical calculation, directly use the awning to define and draw;
Question 4: How to draw Glodon’s awning? The steel bars can be replaced by flat plates
Question 5: How to draw an awning using Glodon Graphics Calculation GCL2008? The awning board is defined and drawn using the cast-in-place board component, the elevation is adjusted in the properties, and the facade part of the awning is drawn using the railing component. View original post >>
Question 6: How to draw the steel bars of the awning using Glodon? Draw it on the cast-in-place board, build a new component, and just name it the awning board.