Blow-line means that when a fishing boat is used to throw lines, the lines in the fishing boat are entangled because the strength and angle are not well grasped. Taiwan Province fishing and traditional fishing do not have this problem.
How to solve the explosion line of Luya drip wheel? Thank you for your five points.
Let me describe how to use the drip wheel for you. I found it online, too. It's good. Please add me Q if you have any questions after reading it. The picture shows my Q, Sonny fishing tackle, which is exclusively sold in Ji Chuan.
Knowledge and use of water drop wheel
I. Drip wheels are divided into 1 and magnetic brake wheels. 2. Centrifugal brake wheel.
1, magnetic brake wheel, its main feature is that there is a magnetic adjustment knob outside, which can be adjusted at 0- 10, and 10 is the maximum braking force.
2, centrifugal brake wheel, its main feature, the side cover is easy to open, mainly to adjust the position of brake beans to control the braking force, the maximum braking force is that all brake beans are pushed out to the outermost layer.
2. Name of commonly used components: 1, astrolabe (adjust the discharging force when winding) 2. Spindle adjustment screw (this screw is beside the astrolabe to adjust the smoothness of outgoing line).
3. Wire-out button (when pressed, the wire wheel can be wired, and the handle can be reset by shaking) 4. Magnetic adjustment knob (marked with braking force 0- 10).
Third, the adjustment method (taking the magnetic brake wheel as an example)
1, first point the magnetic adjustment knob to the scale 10. Let the wheels have the maximum braking force.
2. Lift the lever 45 degrees and adjust the "spindle adjusting screw" to make the bait fall quickly and steadily. After the bait falls into the water, it is better for the spool to continue to rotate. Only in this way can you get the best throwing distance.
3, the astrolabe can be adjusted to the tightest, or there is a state of winding and unloading.
Adjustment complete! ! !
Fourth, throwing method
Pay special attention to the throwing of the drip wheel! First, control the false erbium at a position about 10CM away from the pole tip, and then swing the pole to 10, with the pole tip pointing at 4 o'clock.
Pay attention to the point trajectory 4, 5, 6, 7, 8, 9, 10 of the extreme motion. Just like a golf swing.
Strength: you can use moderate strength at first, and you can use a strong swing after doing it a few times.
Technical point: After throwing the bait, your eyes should start to observe the movement of the bait. Before the bait falls into the water, you should press the reel with your thumb to stop the reel from rotating, not discharging the wire and not frying the powder.
Some people may ask: what will happen if you don't hold down the scroll quickly?
If you really don't press the reel quickly, there will be a situation of powder explosion, sometimes it is more serious, sometimes it is just a slight stir-fry, and it can be easily solved by pulling the wire by hand for about 40-50CM.
If your thumb is well controlled, the drip wheel is very fun.
Verb (abbreviation of verb) notes and supplements
1, beginners had better use cheap nylon thread when practicing to avoid unnecessary waste.
2. It is suggested that the number of nylon threads should be 2-3.
3. When throwing at close range, we use the hook method of Taiwan fishing, and throw the bait out to reach the desired point.
4. In order to pursue a longer distance, please adjust the "magnetic adjustment knob" to move to a smaller braking force according to the weight of bait, find a balance between frying powder and long distance, and maximize your drip wheel.
5. Please use a heavier and bigger bait when practicing throwing, and it is not advisable to replace it with heavy lead. (Heavy lead is not conducive to visual inspection just before falling into the water)
6, in order to throw farther, it is recommended to use a super hard rod!
7. It is not recommended to use a water drop wheel to throw fake bait below 4 grams. Although I can throw 2 grams of lead hooks and small soft worms 7-8 meters, throwing light bait is still the advantage of spinning wheel.
Why does Lu always blow the thread with a thread hook?
There is no shot put under the hook, but the sequins of the hook are used. The best sequins are around 10g. I often play like this.
How to solve the problem that the normal fishing group in Luya explodes every time it throws the rod?
Maybe your fine-tuning is not in place. For beginners, it's best to fine-tune it a little or let the bait slide down the ground at a constant speed under its own weight, and don't pop up extra lines. There is no need to use excessive force to swing the lever. When the bait is about to enter the water, gently press the steel wire cup with your fingers to prevent it from continuing to exit the water. Pure hand tour, hope to adopt.
How to throw the stick without exploding the line for Luya drip wheel?
When using Luya fishing method to fish, use the drip wheel to throw the rod without exploding the line;
65438+
2. Put the thumb of the right hand on the position of the line throwing switch, and split the right hand forward. When the fishing rod makes an angle of 45 with the ground (this angle is the least easy to blow the line), press the line throwing switch to pay off the line, and the fishing rod makes an angle of about 25 with the ground during the line paying off.
3. Observe whether the bait falls into the water at any time. If the decoy falls into the water, it is necessary to press the wire throwing switch within 3 seconds (it is the easiest to fry the wire when the decoy does not fall into the water and 3 seconds after the decoy falls into the water).
How to use Lu's Chinese video to teach without breaking the line
Don't bother, adjust the brakes first, throw the ball gently and find the feeling. The novice didn't survive numerous explosions. I detonated the coil for the first time. Don't throw the bait hard, but use a little elasticity of the pole to throw the bait. Practice more, and then gradually reduce the braking force.
How to prevent Lua drum from exploding?
Turn the brake to the maximum, turn the magnetic force to the maximum, open the centrifuge completely, and then start to throw. If you don't blow the wire, gradually reduce the braking force and find a balance point. Practice a few more times and you'll be fine soon.
How to throw the stick without exploding the line for Luya drip wheel?
Weigh the bait first, and then readjust the brakes according to the bait. Generally, the bait below 7g is set to gear 3-3.5, and the centrifugal brake is set to gear 2-3. But each wheel is different and needs experience to determine the gear. Pick the pole tip at 45 degrees, loosen the silk cup, observe the falling speed of the bait, and adjust the spindle screw (the one next to the astrolabe) until the silk cup does not go out after the bait falls to the ground. Throw the pole smoothly and remember to throw it hard. Typing on mobile phone is not easy, thank you for your adoption.
Why does the spinning wheel explode when throwing thread?
Spinning wheel is the best choice for beginners in Luya. Spinning wheel is easier to operate than drip wheel, but if it is not operated properly, it will sometimes lead to thread explosion. Now, let's talk about the main reasons for yarn explosion in spinning wheel: 1, yarn outgassing-what is yarn outgassing? It means that when Luya recycled, the thread passed through some irregular rotations of Luya, and it has been twisted with Luya many times, and it will be recycled. You will see that Luya is still spinning infinitely, which proves that the gas supply situation of the line is very serious. When throwing the second shot again ... it's easy to make a fried line ... Note that ... when you use rotating blades ... the air on the line will be the most obvious ... There are two A's ... Just solve the air problem ... The front end of the line is connected with a movable figure-eight ring ... but there is one disadvantage ... the weight of fishing groups has increased. Luya can't be in the most natural state b). When you don't connect the eight-character ring ... when you find Luya ... if you find that Luya's rotation is uncertain ... you can stop Luya's rotation a little before throwing it ... This is a problem that only novices will encounter ... If you are an old hand ... because you have better experience ... there are fewer cases of bursting the thread with a spinning wheel. 2. It is related to the thickness and material of the thread. If the thread is thick and hard, it is easier to blow the thread and tie it; The main line should be selected with moderate toughness and hardness. At present, PE wire is generally used in Luya line, and carbon wire can be used as lead wire, which is not suitable for main line. 3. It is related to the degree of thread tightening. Too loose, needless to say, will of course cause knots; It's too tight to get out easily. When throwing, the speed of the line will be uneven, and the back will be knotted if it exceeds the front. Therefore, taking up the line is the key, especially when the bait is light and fast, the line is not stressed and it is not easy to tighten. At this time, it is necessary to keep the club head bent, and the pole holder should swing the fishing rod by using the elasticity of the line to close the line as evenly as possible. When the bait is about to come out of the water, stop winding while keeping the fishing rod bent, and then tighten the remaining line when the bait and line do not rotate too much. 4. When throwing the thread, the thread is loosened prematurely, and the thread is not stressed, so it is easy to be fluffy and fall off from the thread cup. As soon as the bait is opened, it will separate one by one, causing knots. Personal experience: throw the fishing rod in the direction to be specified, and the bait has a speed close to this direction. At this time, the line gives the hand a force, then release the finger, and the fishing rod reaches the designated position to wait for the bait to enter the water. 5. Throwing poles against the wind can easily lead to wire explosion. This is because the wire will be blown back by the wind after being thrown, and the wire in the wire cup will continue to be released, so some wires will be twisted and clamped by the wind, and wire explosion will occur. 6. The thread in the threaded cup is too full. If the thread in the threaded cup is too full, the loose thread on the surface will be led out when throwing the rod, and then it is easy to make fried thread. In general, the optimal thread capacity of threaded cup should be 8 ~ 90% ~. Don't put too much thread into the thread cup, lest the thread cup be too full. The above is just personal experience, and I feel bad for the time being. I hope more experienced anglers will supplement it and give more help to novices.
How to explosion-proof Lua straight handle bar? (spinning wheel)
When winding, it winds more tightly.
Why is the line busy? Don't have too many dotted lines, which will lead to inconsistent winding tightness and easy to tie the wire when casting.
Don't spill the wire cup.
In fact, spinning wheels are not easy to blow up threads.
I played in Luya for five or six years and appeared twice.