First of all, method one:
1, tie the red rope head and fix it, then put the left rope on the right, and the right rope passes through the left mulberry from below. After tightening, repeat the same steps and knit all the way. Wrap it up after weaving, connect the two sides, cut off the excess thread and fix it with fire.
2. Prepare a red rope, then tie the head, put it aside and fix it, with more lines in the middle, and then put the rope from left to right. The rope on the right goes from the bottom to the top left, and after it is tightened, repeat the same steps and weave all the way down. After the whole weaving, simply finish.
3. Connect the left and right sides together, cut off the extra thread, and then burn it to fix it more firmly, so that the simple transfer knot is completed.
Second, the second method:
1. First prepare three red ropes, a pair of scissors, a lighter and two beads. Tie three ropes together, the red rope on the left presses the middle rope to the right, and then passes through the red rope on the right, and then the red rope on the right passes through the middle rope to the left and the circle formed by the left and middle red ropes from bottom to top.
2. Then tighten the red rope and repeat for 3 to 5 times. After weaving, open the previous knot and weave it repeatedly to form a spiral flower. Then continue to weave, and after weaving to a suitable length, put the red ropes at the ends of both sides together and interweave them.
3. Finally, finish the finishing work, and then weave 4 to 5 pairs of two-way flat knots with red ropes to make adjustment buttons. When finished, tie beads or knots on the tail line of the red rope. Then cut off the excess thread with scissors, and then burn the thread with a lighter.