Binding method of string hook in sea fishing: There are many ways to connect the brain line of string hook with the main line. Here is a simple and practical binding method.
First, cut the brain thread of the hook into 25 cm long and tie the hooks one by one. The thickness of the brain thread should be selected according to the size of fishing at ordinary times, generally between 0.3 and 0.4 mm, and then a nylon monofilament with a length of 80 cm and a thickness of 1.2 (that is, 0.4 to 0.5 mm) is selected as the connecting line.
Then find a section of ordinary plastic sheath line, remove the copper wire inside, cut the plastic pipe outside into 4 ~ 5cm long, and cut both ends into oblique mouths, and then pass the lower end of the connecting wire through the plastic pipe to form a dead button. At this time, the oblique mouths at both ends of the plastic pipe are opposite, forming an oval small circle.
It has three functions: first, it acts as a stop under the living pendant; Secondly, as a connecting coil, a large group of bait can be hung on this coil, which can be directly used for fishing or as bait for making nests.
Installation method of sea pole string hook:
1. Handling the main line: Insert two space beans into the front end of the main line and install the lead pendant.
2. Connect the main line and the secondary line: take a fishing line as the secondary line and tie it to the main line.
3. Assemble the string hook: insert a space bean into the folding line, then hang the hook at the end, and repeat this step to install the string hook.
4. Hooking: Wrap the hooked auxiliary line around the main line, put it above the main line, hold it still with your left hand, and wrap it around the hook end with your right hand for about 5 times, and finally tighten it.
String hook is a kind of fish hook binding method, also called grape hook or centipede hook. Usually 3-5 hooks are tied to the main line and often thrown with a fishing rod. If string hooks are used, the hooks should be separated by a certain distance, so that they can be in different water layers after falling into the water, thus catching different fish and improving the hook rate.
After the string hooks enter the water, make sure that each hook can be stretched and unfolded, and at the same time, it cannot be entangled with the main line. Its brain line should be harder, with nylon thread, not too long, only 5-8 cm on one side.