The sky hook is mostly used for traditional fishing in Jiangnan. The hook is directly welded on the hook handle, and the main line is directly knotted. Its characteristic is that after entering the water, the hook lifts the bottom and the hook tip is upward, hence the name.
Because there is no substring at the bottom, the main line is directly affected by the fish's feeding and reflected on the buoy, so it is the most sensitive fishing method in traditional fishing.
However, the most important thing to pay attention to when fishing in the sky is that the hook should be fastened and then put into the water, preferably with the hook tip up, so the fisherman must pay attention to this when helping the hook in the sky:
In addition, the hook is bought back, which is good or ugly. It's best to process the tin head slightly with a knife. As for the tying method of the hook, I will explain it to you now.
1 wireless slot hook binding method
The hook tip is upward, and the line passes through the hook eye from the lower side of the lead distribution; Stretch the short head and cross it with the long head to form a circle;
Then use the long line to wind several times on the short line and hook tip (note: parallel winding along the distribution direction of the lead); After winding for four or five times, tighten the short wire and cut the short wire to finish.
2. Binding method of slotted hook
With the hook tip facing upwards, thread the thread into the hook eye from above, and thread the thread back from the hook eye, leaving a thread sleeve; Then put the thread sleeve into the lead distribution groove of the hook, tighten the thread on it, turn the thread in the groove for one or two turns, then buckle it and cut off the thread end.