The method of using the soft bait lead head hook is as follows:
Tie the lead head hook to the artificial bait
1. First, you need to bind the artificial bait (mainly curly tail maggots) Start with the lead head of the lead hook (mainly) to measure where the hook should pierce the insect body to ensure that the body of the mollusk can still maintain the original state of the insect in the water after being hooked. The swimming style of the state attracts the target fish.
2. If the puncture position is too far back, it will cause the body of the soft worm to bend after the bait is hung, which will affect the swimming posture of the hook group in the water and block the hook tip from stabbing fish. If the puncture position is too far forward, the soft worm will not be able to fully reach the installation position, and the fish will not be able to bite the hook tip when attacking, and the fish stabbing effect will not be achieved.
3. After the hook tip completely penetrates the insect body, the installation is not completed. There is a lead-cast barb on the neck of the lead-head hook. This is so that the soft worm can be firmly combined with the hook body after installation and will not be bitten off by fish or hung up by underwater debris.
Steps for hanging on the main line
1. The lead head hook can be used directly after hanging the soft bait, but it needs to be connected to the main line through the sub-line. You can cut off a certain length of sub-thread. The normal length of the sub-thread is about 30 to 50 centimeters per side. You can hang it with a double hook or a single hook.
2. Pass one end of the sub-thread through the small hole on the head of the lead hook, and tie it tightly without looseness. The other end of the sub-thread passes through the figure-eight ring and then knotted firmly. Then connect it to the main line through the figure-of-eight ring. As for the connection between the lead hook and the main line, it is similar to how we usually use double hooks or single hooks on the sub-thread to hang the figure-eight ring.
Lead-head hook fishing method
Usually, the tip of the fishing rod is used to bounce the lead-head hook fishing group from the bottom of the water. The weighted lead-head hook is hung with soft bait or live bait. It can be drifted or fished Trolling. Just simply twitch the tip of the rod and let the lead hook occasionally rise or fall to the bottom of the water, going back and forth multiple times; or cast and retrieve the line while bouncing the lead hook from the bottom; or simply cast and retrieve the line back.