The sub-wire is tied with a splay ring at high speed, and the knot passes through the ring twice, and then one end of the threading ring is pulled, and the sub-wire is taken out without cutting.
Here, a thin iron wire is used to replace the eight-character ring, and a thicker main line is used to replace the auxiliary line. The eight-character ring and sub-line are too small for everyone to see clearly.
Because it is a simple connection binding method, the operation process is very short. Dear fishing friends, please read the pictures carefully, and we will try our best to make it clear.
First of all, the premise is that the double hook line is tied
First, put the knot of double hook line through one end of the eight-character ring.
Thread the double hook thread through the eight-character ring
With the hand holding the figure-eight ring, turn the figure-eight ring for two times and twist the sub-thread, either clockwise or counterclockwise.
Rotate the splay ring twice.
Then pass the knot of the double hook line through the sub-coil covering the eight-character ring.
The head of the double hook wire passes through the sub-coil.
Then we tighten the whole thread, and it's done.
Tightening the thread is complete.
Simple, right? Some fishing friends will ask, will such a simple tie be strong? Actually, there is no need to worry. Although this binding method is very fast, it conforms to the main idea of connecting the eight-character ring with the sub-line. Its main idea is that the connection should be firm and firm, and the force should be balanced and not loose. Therefore, it has high strength and will not be easily broken by fish.
Not only is it simple, but it is also very tense.
This binding method can also be quickly disassembled, and the parting line will fall off directly from the knotted place, and scissors are not needed at all.