1. Recommended size of villa solid wood door
1. The size of solid wooden doors in villas is generally in width:110-120cm; The best size of the courtyard gate of a villa is related to the land area, building scale and architectural form of the villa, which is generally not less than 2.5m, and at least can enter the car. Common sizes are 3m and 4m. The gate of the villa is measured by Lu half a foot, and Lu half a foot has two lines, namely "secretary" (for geomantic omen in Yang house) and "Ding Lan foot" (for geomantic omen in Yin house). Woodworking masters often say: "The street gate is two feet eight, and life and death are built together." That is, the width of the residential gate is 2 feet 8 inches (about 90 cm), which is in line with the auspicious number of "Lu Banchi".
2. The size of the solid wooden door of the villa should not be too low. People's eyes are used to looking down, and when they encounter strong things, they will choose to bow their heads and yield, thus becoming short-sighted, timid and inferior, and being bullied all their lives;
3. The size of the solid wooden door of the villa should not be too wide: the door is too wide to hide the wind and gather gas, not only can not keep money, but also the population will be scattered, the body will become weaker and weaker, and the door is too wide, and the elderly at home will feel hard; The door should not be too narrow, the door is too narrow, the entrance and exit are uncomfortable, there is a sense of oppression, the line of sight is narrowed, and the height and width of the heart can be easily measured in the door frame. It is not appropriate to use official document ruler, because the figures are black and do not conform to Feng Shui, which can raise the threshold and meet the rules of the scarlet letter. If the width is a sunspot, you can put a set of five emperors' money on the threshold to solve it.
2. How to choose the solid wooden door of the villa?
1. When purchasing villa solid wood doors, the materials should be as follows: the materials of all parts of the door leaves must be old American pine, the moisture content of all the wood must be strictly controlled within 10%, and the wood should be treated with anticorrosion, degreasing, dehydration and drying; Raw materials should be aged.
2. When buying the villa solid wood door, the structural stability of the product after molding: there can be no knots on the wood surface; There shall be no more than five slipknot per square, and the diameter of each slipknot shall not be greater than 30mm, and there shall be no wood cracking or wormholes; The inner and outer surface materials shall not have resin packages, and shall be used as a single or complete product. The texture of the tree species used should be similar, and there should be no obvious difference in the same rubber composition tree species. Needles and hardwood can't be used together.
3. When buying solid wooden doors in villas, the moth-eaten wood must be treated with pesticides, and insects are not allowed to continue to erode the wood. Decayed wood shall not be used in visible parts, the light decayed area of materials in internal or closed parts shall not exceed 15% of the area of the parts, the depth shall not exceed 25% of the material thickness, the twill degree of the stressed parts of the products shall not exceed 20%, the joint width shall not exceed13 of the visible tree width, and the diameter shall not exceed 12mm.
What are the recommended sizes of villa solid wood doors and how to buy them? The above article is about the recommended size of villa solid wood doors and how to buy them. Want to know more about the decoration, please continue to pay attention.