1. Twisting finger: wrap the bodhi thread and push the outer ring to cover the inner ring with your thumb.
2, eight-character disk method: string Bodhi around the middle finger and thumb, and then the middle finger of the thumb shuttles back and forth.
3, middle finger wave method: the same is to bypass the middle finger and thumb, and use the ring finger to push the bead string.
4. Finger drooping: the double ring is sleeved on the middle finger, and then the outer ring is sleeved on the inner ring.
5, the thumb is soft around the finger: the double ring is placed on the thumb and rubbed with the index finger.
6, rub a rub method: hold the bead string in one hand and rub it with both hands.
7, grinding bead method: a grinding bead rub this method is more comprehensive.
Precautions for Pan Bodhi:
1. When operating the Bodhi device, pay attention to safety, and don't move too fast or too slowly to prevent danger.
2. Before using Bodhi, check the surrounding environment to ensure that there are no obstacles in the work area.
3. Before using Bodhi, make sure that it is firmly fixed and cannot be loosened.
4. Pay attention when using the bodhi, and avoid damaging the equipment or causing danger by using too much force.
5. When loading and unloading objects, it is necessary to check the center of gravity and fixation of the objects to ensure that no accidents occur.
6, the operator should wear protective equipment, such as helmet, safety shoes, etc. And ensure your personal safety.
7. Long-term use of Panbodhi should pay attention to the supplement of food and water to prevent physical discomfort. The bracelet is a natural plant product, so it should be well maintained during use to avoid damage caused by physical factors such as long-term exposure and pressure. It can be wiped with cloth or maintained with transparent paint.
8. The used bodhi should be cleaned to ensure its normal service life.
9. During the operation of Banbodhi, it should be tested and maintained regularly to ensure its normal operation and safety.
10. Do not repair or replace spare parts without relevant certificates and qualifications to avoid unnecessary losses and dangers.