What's the difference between scaffolding small bars and large and small bars?

First, use different methods:

When using stamping scaffolding, wooden scaffolding and bamboo scaffolding, use the big bar as the support of the small bar;

When using bamboo basketry, the big bar is fixed on the small bar.

A small bar must be set at the junction of the main pole and the vertical pole. The small rod is arranged on the main rod and buckled with the vertical rod. A small bar is added to the two vertical poles of the scaffold board layer, and a small bar is also needed at the joint position of the scaffold board.

Both ends of the small bar should be fastened with the main bar or column. The length of the small bar protruding from the inner and outer columns is determined according to different parts and different construction periods, and its protruding principle is determined by the distance between the structural edge and the inner columns.

Second, the direction is different:

The main rail refers to the longitudinal horizontal bar, that is, the horizontal bar arranged longitudinally along the scaffold.

Small bar refers to the horizontal bar, that is, the horizontal bar arranged horizontally along the scaffold.

Extended data

Usage requirements:

1, erection of high-rise scaffolding, all kinds of materials used must meet the quality requirements.

2, high-rise scaffolding foundation must be solid, before erection, after calculation, meet the load requirements, and according to the construction specification, drainage measures.

3, scaffolding technical requirements should comply with the provisions of the relevant specifications.

4. We must attach great importance to various structural measures: bracing, pulling joints, etc. Settings should be made as needed.

5. Horizontal joint sealing: From the first step, every one or two steps, scaffold or scaffold board shall be fully laid, and the scaffold board shall be laid along the long direction, and the joint shall be overlapped on the small bar. Short boards are strictly prohibited. And a long safety bottom fence is laid every four steps between the upright post and the wall.

6. Vertical sealing: from the second step to the fifth step, a protective template railing and skirting board or net with a height of1.000 m shall be set inside the outer row of vertical poles in each step, and the protective poles (nets) shall be fastened with the vertical poles; Above the fifth step, in addition to the protective railings, safety fences or safety nets should be set up; In streets or densely populated areas, from the second step, all safety fences or safety nets should be set outside.

7, scaffolding should be higher than the top of the building or operating surface 1.5m above, and add enclosure.

8. After the scaffold is erected, the steel pipes, fasteners, scaffolding and connection points on it shall not be removed at will. When necessary in construction, it must be approved by the person in charge of the site and effective measures should be taken. After the process is completed, it should be resumed immediately.

9, scaffolding before use, should be organized by the person in charge of the inspection and acceptance, and fill in the acceptance report rear can use. Professional management, inspection and warranty are required in the construction process, settlement observation is carried out regularly, and reinforcement measures are taken in time if any abnormality is found.

10, scaffolding demolition, should first check the connection with the building, as well as the remaining materials on the scaffold, sundry, etc. When cleaning, it shall be carried out from top to bottom in the order of first assembly and then disassembly, and the removed materials shall be uniformly transferred downwards or hoisted to the ground, step by step. Step demolition method is not allowed, and throwing or pushing (pulling) demolition is prohibited.

1 1, scaffolding should set up a warning zone, and hold people alert. In case of gale and bad weather above level 6, the erection and dismantling of scaffolding should be stopped.

12. When the foundation is uneven, please use adjustable feet to achieve balance. The foundation must be able to withstand the pressure of scaffolding and work.

13. Workers must wear safety belts when working at high altitude. Please install a safety net around the work area to prevent heavy objects from falling and injuring people.

14, scaffolding components, accessories in the process of transportation, storage, it is forbidden to seriously fall, impact; When overlapping disassembly, it is forbidden to throw it from a height, and the disassembly should be carried out from top to bottom in turn.

15, pay attention to safety when using, and it is forbidden to play on the shelves to prevent accidents.

16. Work is important, but safety and life are more important. Please remember the above.

Baidu encyclopedia-scaffold