The production process is as follows:
(a) Put the bamboo in the steam room for half an hour, then take it out and put it in the shade to dry, but it shall not be excessively dried or exposed to strong light.
(2) Use a bamboo plane to shave off the rough epidermis of the cow's face.
(3) the length required for cutting bamboo strips; This depends on the size of the lantern.
(4) The lamp holder is crossed by weaving method.
(5) Tie several bamboo rings on the lamp wall in the middle of the lamp holder.
(6) Paste (install) lanterns with cotton yarn first, and then paste two layers of lantern glossy paper. If there is no glossy paper, fine cotton paper will do. ) Paste cotton gauze, first brush the diluted gauze evenly on the surface of the skeleton, then gently stick the cut gauze on the lamp holder, and then brush it flat with a brush dipped in paste. It should be noted here that the brush for brushing the paste must be a clean brush, otherwise the lamp surface will be messy. At the same time, the pasted paper must be pasted without seams in order to be truly pasted.
(7) Put the lanterns in a cool and ventilated place to dry.
(8) painting. Painted with personal patterns, such as figures, eight immortals, flowers and birds, ladies and so on.
(9) After painting, decide whether to write or not according to the situation. When the characters and patterns are completely dried, coat them with tung oil, and then let tung oil dry in the shade, and the lantern is finished. Fuzhou lantern-also known as umbrella lantern.
Zhu Gui: This is the most widely planted bamboo in Taiwan Province Province. Hard and elastic, suitable for fishing rods, brooms and other appliances.
Bamboo strips: Bamboo is split into bamboo strips, which are called "bamboo strips". Punch holes at the upper and lower ends of the bamboo stick and thread them with iron wire.
Bamboo Head: Grooves are carved on the bamboo joints in Zhu Gui and fixed with thick iron wires to form the head and bottom of bamboo lanterns.
Exercise:
1. Install the bamboo pole with iron wire on the bamboo head base.
2. Install the bamboo pole on the groove, and finally tie the bamboo head with iron wire to form a bamboo frame.
3. Stand against the ground and slowly push the bamboo frame down until it becomes tubular.
4. Fold the bamboo stick by hand and adjust the shape, curvature and spacing of the lantern bamboo stick.
5. Tie cotton thread on the top of the lantern to fix the bamboo stick.
6. Spread the white yarn on the bamboo strips and fix it with paste.
7. Wait for the gauze to dry before applying agar.
8. After drying in the shade, the cylindrical umbrella lamp is shaped.
9. Then draw and draw. Generally speaking, the characters are scarlet, and the pictures are auspicious paintings, such as the Eight Immortals crossing the sea and Fu Lushou's Samsung.
10. Finally, put the base on the bamboo head and decorate it, and it is finished. Gaocheng lanterns are also called palace lanterns.
The craft of Gaocheng Palace Lantern is mainly made by hand with steel wire as the skeleton, plastic upper and lower seats and hollow iron as the support, and colored cloth as the main raw material.
1. Insert the upper and lower ends of the special steel wire into the holes of the upper and lower plastic seats respectively, and the skeleton will be formed. 2. Insert two iron bars into the two large holes of the upper and lower plastic seats of the newly made skeleton, and fix the iron bars at one end with the plastic seats with an air nailing gun after the size is appropriate, and the skeleton is finished.
3. Cut the cloth into oblong pieces, embroider, gilt or color print the pieces into patterns symbolizing good luck, and then tie the edges of several pieces of cloth with sewing machine, so that the lantern cover is completed.
4. Put the lantern sleeve into the skeleton, and then press the skeleton down. When you hear a click, it means that the lamp holder has been stuck by the iron needle of the iron core. At this time, the seam of each piece of cloth on the lantern sleeve is pushed to the steel wire, and all the steel wires are uniformly set to the same distance. Palace lanterns have already taken shape.
5. Put the newly erected palace lantern on the bracket, put white latex gold bars on each steel wire on the cloth with a manually operated gold bar machine, and then dry it.
6. After the gold bars are dried, stick golden auspicious clouds around the upper and lower seats of the lanterns, and then dry them.
7. After the lantern is dried, press the iron pin on the pole with pliers and the lantern will be closed. Wrap a circle of golden tape around the joint between the lamp holder and the lamp cover, and the lantern is finished.
8. The finished lantern can be a relatively complete palace lantern by directly sticking yellow rows of whiskers on the lower seat. It can also be equipped with large rings on the upper and lower lamp holders, with golden laser tape on the upper ring and hydrangea on the lower ring, which makes the palace lantern more beautiful.
9. Finally, press the string of hanging lanterns on the top of the pole, and a beautiful palace lantern will be completed. LED lanterns have developed 10 series and more than 80 styles of lanterns, such as luminous dragon bracket cage, luminous Q-shaped dragon bracket lantern, dragon bracket with small lanterns and so on. , and produced a variety of LED lanterns and a variety of oversized LED lanterns.
Hongxi red lanterns are assembled lanterns, which are made of environmentally-friendly PP plates and have varied styles. At present, there are eight series of wax gourd, palace lantern, vase, round, square and spring, and more than a dozen lanterns of different sizes!
There are palace lanterns, gauze lanterns, chandeliers and so on.
From the modeling point of view, there are figures, landscapes, flowers and birds, dragons and phoenixes, fish and insects and so on.
In addition, there are lanterns for people to enjoy. Lantern in China is a combination of painting art, paper cutting, paper binding, acupuncture and other techniques.
Palace lanterns and gauze lanterns are the most famous lanterns in ancient China.
Lanterns have other meanings besides lighting. One side of the lamp is the surname or the name of God, and the other side is auspicious patterns such as the Eight Immortals (Lv Dongbin, He Xiangu, etc. ) and Fu Lushou Samsung.
Like Chinese lanterns and auspicious lanterns, on the one hand, there are surnames, names of gods or auspicious words, on the other hand, there are auspicious patterns.
The words and pictures painted on the official lamp are the same as those on the general lamp, except that the bottom is black and the words are gold. This kind of lantern can only be hung if it is given by the emperor.
The celebration of the Spring Festival is still in my mind, and the joy of the Lantern Festival has climbed on my forehead. The festive and auspicious atmosphere of red window grilles, big blessings, colored balls, bells and lucky stars in the Spring Festival is still spreading, and the red lanterns of Yuanxiao will be hung high again! Home is embraced by a rich festive atmosphere, lanterns of different colors rekindle the joy of the New Year, and happiness has become a common occurrence on your table.
Colorful paintings on lanterns can not only create colorful visual effects, but also often convey people's good wishes for life. Under the light, colorful lanterns fill the hall like proud as a peacock, and the magical colors in the room create a dreamy state, which is enough for you to enjoy on this special Valentine's Day in China. Not to mention the extremely comfortable feeling brought by the wonderful meanings of various paintings. Generally speaking, there are two kinds of lantern paintings: one is to use the existing paintings and paste them after the lantern skeleton is finished; The other is to paste ordinary paper directly on the skeleton of the lantern and then color it. The latter is a very difficult technique, and because it is done before painting, the clarity and looseness of the pattern are better. Relatively speaking, the former is more suitable for square lanterns (including square lanterns and hexagonal lanterns with geometric planes), while the latter is generally suitable for all kinds of lanterns. As far as the design of lanterns is concerned, Lantern Festival lanterns pay special attention to the meaning of the design itself. Traditional patterns include dragons, phoenixes, tigers, pine cranes, flowers and birds, the god of wealth, the husband of your dreams, and making money into treasures. In the Year of the Sheep, there are goats, sheep and other different kinds and colors of sheep on lanterns, which all indicate good luck and rich resources at the beginning of the new year. Looking forward to the new year's atmosphere during the holiday season, my heart is happy. In addition, different times and different rooms have different choices of lantern paintings. The living room and porch are suitable for hanging lanterns with traditional patterns, and the elderly rooms are suitable for choosing lanterns related to their interests and life background. The children's room will of course show the most vivid pictures in the simplest way. In fact, children's lanterns can also be used by themselves. Drawing a cute little animal, a favorite "cartoon messenger" or painting it as an "abstract painting school" can add a lot of color to the room. Materials: cardboard, paper cutter, ruler, pencil, double-sided tape, string.
Step: 1. Prepare a rectangular red cardboard (I use an expired old calendar card) and make a beautiful little lantern by myself.
2. Leave 0.5~ 1.0cm on both sides of the cardboard, draw several parallel lines equally, and then cut them with a paper cutter.
3. Roll it into an arc.
4, to paste, cut the scraps into thin strips to make spikes, and then tie a string to make a beautiful little lantern.
5. Beautiful little lanterns are ready.