Explain in detail:
1, first make a double hook line and put the knot through one end of the eight-character ring. First, fold the main line in half 10cm, and then pass through the eight-character ring.
2. Hold the handle of the figure-eight ring and turn the figure-eight ring for two weeks, so that the thread can be screwed on. Tighten the fast knot slightly, then put the figure-eight ring into the coil on the right, turn the figure-eight ring into the coil to the right, and turn the coil onto the fast knot.
3. Rotate clockwise or counterclockwise. Then, the knot of the double hook wire is passed through the secondary wire coil covering the splayed ring. Finally, tighten the thread as a whole, and then slowly tighten the two threaded ends.
Precautions:
1, the longer and thinner the sub-line, the easier it is to knot in use. Although the eldest son line has good concealment, because the hem is too big, it is easy to entangle with each other or even with the main line during the fall. Therefore, when choosing the length of parting line, it is suggested that crucian carp choose 30 ~ 50 parting line and carp choose 50 ~ 80 parting line.
Of course, if you fish on a large water surface (such as a reservoir) with thick lines, you can use long lines, such as one meter or even shorter.
Don't expose the thread for too long after knotting. Too long thread will not only affect the profit of fishing line, but also increase the winding probability of sub-thread. I suggest you bake the extra thread with a lighter after the fight. The shorter and smoother the better.
3. The influence of the figure-of-eight ring on the winding of the sub-wire can not be ignored. In the daily fishing process, many friends will blame the quality of the secondary line, but often ignore the influence of the eight-character ring. The eight-character ring has two main functions: one is to connect the secondary line with the main line, and the other is to rotate freely after the fish is hooked, effectively preventing the secondary line from winding.
There are obvious differences in the rotational speed of different eight sub-rings, that is, the eight sub-rings have high rotational speed and low rotational speed. The flexible rotation of high-speed splay ring will naturally reduce the winding probability of sub-wires, on the contrary, it will increase the winding probability of sub-wires. In addition, it is suggested to replace the rusty octal ring in time. This octuple ring will not only damage the conductor, but also increase the winding probability of the conductor group. In order to save an eight-character ring, it is really not worth losing a set of sub-lines.
4. Finally, after tightening the fast knot, just cut off the short head, thus completing the knotting method of connecting the eight-character ring with the sub-line.