How to lay floor tiles

Bricklaying must first determine the bricklaying scheme according to the actual situation on site, first check the construction drawing to see if there are wave lines and mosaics, and then determine the bricklaying scheme before paving. Bricklaying should pay attention to several points, the paving method with the least materials and the most beautiful paving method. Remember that the joints of the tiles at the gate should not be in the middle, and if there are any, avoid them. When laying tiles, first wet the tiles and play the horizontal line, then wet the ground or wall surface, then mix the cement mortar, then lay the cement mortar as the base, then apply cement oil on the tiles, then lay the tiles, pave the corners and levelness of the tiles with a mallet or rubber hammer, knock the uneven places, and wipe the surfaces of the tiles with a wet cloth for half an hour after laying.