Installation skills of customized furniture

Before making custom-made furniture, you must measure the owner's room to avoid some sizes of furniture. Many owners put forward home measurement without decoration or after decoration. At this time, the height of the ground and the treatment of the wall surface have not been completed. It is easy to find that the furniture cannot be equipped after being shipped home. For example, the cabinets are too high to be transported upstairs after completing the stairs.

Gap treatment

Scrape the gap between the cabinet and the wall with a putty knife and scrape it into a figure of eight with wide outside and narrow inside. Plug the gap with gypsum block dry powder, instead of wall plug, which is lower than the wall11.5 mm. Glue the gap and paste the glass cloth. Scrape 82 1 putty to smooth the original wall, dry it and polish it with sandpaper.

Coating selection

The prepared wall coating, after drying, has little color difference compared with the wall color, so it can be brushed. It can be filled with foam expansion agent, smoothed with wall putty and brushed with latex paint. In this way, the cabinet is combined with the wall, so it is not easy to crack in the future.

Cleaning treatment

Don't use glass glue, just use indoor Black & Decker edge sealing glue.