1 First, we cut the packing tape. The length of the tape is cut according to the size of the basket. Six strips on each side are about 85cm long, and the number is twelve.
2. Then tear the packaging tape into three strips. We should be careful when we open the door. Don't tear it in a hurry It will look ugly if you tear them quickly. Be sure to tear them evenly.
3. When the back is torn, we start to cross weave, leaving a hole like one centimeter in the middle, and then start to weave three-sided tapes. If two pieces are woven together, they can be cross-woven without overlapping.
It's almost time to knit up. Tighten both pieces at the same time, and then continue to knit. If the torn tape is not long enough, you can continue to join it and knit it again. It's almost time. We can continue with a circle of wire. Finally, you're almost ready to shut up and put on your feet.
Finally, we screw up the handle of the basket with iron wire, then seal it, and finally wrap the finished iron wire around it with a tape.
How to weave a basket with packing tape?
1, first prepare 20 packing belts, including 4 green packing belts and 0/6 white packing belts; Then, the square base of 10x 10 is compiled by selecting one.
2. Divide the 10 bands on each side into two groups, one with 4 bands and the other with 6 bands. Note: 6 root groups are adjacent to 6 adjacent root groups and 4 root groups are adjacent to 4 adjacent root groups.
3. Select one for editing, namely, Article 4 and Articles 5, 6, 7, 8, 9 and 10, Article 3 and Articles 5, 6, 7, 8, 9 and 10, Article 2 and Articles 5, 6, 7, 8, 9 and 65430.
4. The following work is simple and relatively difficult, because the packaging has thickness and hardness, and it is impossible to be completely seamless.