The binding method of sub-line and main line is:
1. Preparation work. Prepare a figure-8 ring and a pair of scissors, and tie the sub-threads in advance according to the specified hook distance.
2. The main line is connected to the 8-figure ring. Pass the main thread end through the figure-eight ring hole three times, twist it into an 8-byte shape, pass the main thread end through the figure-eight ring hole, and then tighten it firmly.
3. The sub-line is connected to the 8-shaped ring. Insert the sub-thread knot through the 8-shaped ring hole on the other side, turn around the twin strands 2 to 3 times, then lead the thread end out of the thread hole on the outside of the 8-shaped ring, and tighten it.
Notes are as follows:
1. When choosing a figure 8 ring, it is recommended not to just focus on the price, but to pay attention to its material, durability and speed. A good quality figure 8 ring is not only strong but can also reduce the chance of sub-threads getting tangled. On the contrary, it will have a negative impact on our normal fishing.
2. When connecting the main line to the figure-8 ring, try to thread it twice as much as possible. If worn less frequently, the nylon thread will easily loosen, causing thread breakage and missing fish.
3. The method of connecting the sub-threads to the figure-8 ring is relatively simple. In fact, it is a typical rein knotting method. Therefore, the sub-line knot must be firmly tied to prevent the sub-line from deflecting when it is stressed.
The difference between the main line and the sub-line is: in fishing, the main line group and accessories can be flexibly moved on the main line, such as floats, space beans, etc., while the sub-line is the hook and bait, connected to a swivel.
The function of the sub-line is that if the line is broken, a small amount of things will be lost. If the main line is not thicker, a lot of things will be lost if it is broken. The main line is connected to the float, and there are 8 under the main line. The word ring, the 8-word ring is connected to the sub-thread, and the sub-thread is connected to the hook. Generally, the sub-line is thinner than the main line, so the sub-line should be cut off before the main line, otherwise the float will be gone.