Manufacturing method of folding table feet

To make folding table legs, we must first prepare materials: wooden boards, wooden screws, wooden strips, nails, M5 cm long M6 bolts. We also need to prepare tools: tape measure, hammer, saw, hand drill, adjustable wrench and Phillips screwdriver.

1. First, saw out four table legs, four desktop support rods, four short fixing rods and two long fixing rods (the thickness of the table legs is two more than the short ones).

2. Drilling: according to the required table height, drill holes at the intersection of four table legs, and the positions of the four holes should be consistent. Put the foot of the table? Drill holes at the connection with the desktop support bar. How to fold the folding table?

First, pull the legs out of the slot and fold them in. When closing, just press the round tube connecting the end of the table leg, and finally pull it out of the slot and fold it inward. In addition, the legs of the folding table are made of steel pipes. After mopping the floor, the water stains on the surface of the steel pipe must be dried with a dry cloth in time. Spray SAIC wax or sewing machine oil for maintenance, and remember not to scrub the steel pipe surface with rough and sharp materials.