Install from front to back.
First pick up the frame of the twist car. You can clearly see that there is a hole in the front part of the frame. Then put the front wheel of the twist car up through the hole from the bottom of the frame. Pass, then put the sponge sleeve into the front wheel shaft, continue to push, align it with the hole on the top of the front body of the frame, pass it through, and gently tap the front wheel tightly.
Next, align the steering wheel and insert it into the receiving hole of the upper shaft of the front wheel. The steering wheel should be aligned and aligned with the front wheel. Mothers should pay attention to the small wheel in the front wheel in front and the big wheel in the back. ,alignment.
Fix the steering wheel to the front wheel, use the provided installation tool to insert the sleeve into the screw in the steering wheel, and then tighten it slowly in a clockwise direction. Be sure to pay attention to the steering wheel. The screws are expansion screws, which must be tightened. After tightening the screws that fix the steering wheel and front wheel, cover them with a specially designed cover.
To install the rear wheel of the twist bike, you must first turn the frame over, and then install the rear wheel of the twist bike. There is a bayonet at the rear wheel. You must align it with the bayonet and then push the rear wheel. Insert the wheel into the rear wheel hole of the twist bike frame.
When installing the rear wheel, pay attention to the direction of the rear wheel, because the correct rear wheel installation must be in a figure-eight shape, so it must be distinguished clearly to avoid errors that may lead to installation errors and reinstallation; reinstallation There will be a drawback, because the rear wheel of the twist bike has a bayonet, which is prone to breakage after being installed and removed.
After inserting the rear wheel into the rear wheel hole, turn the frame over to the front so that the rear wheel is on the ground, and then tap the rear wheel against the ground to make the rear wheel truly snap into the body. After the installation is completed, you must first try to see if the twist car is really installed firmly. Only after making sure it is stable can you safely use it for your baby to avoid accidents during use.