Material preparation:
1. Crystal drops
2. Transparent glue
3. Colored particles or beads
4. Mold (it can be silicone mold or other suitable mold)
5. Stir bar or toothpick
6. Hot air gun or hair dryer
Steps:
1. Prepare the required materials and clean the mold.
2. Pour the transparent glue into the container, and then add a proper amount of crystal glue. The amount of glue dripping can be adjusted as required. Generally speaking, the more glue drops, the more obvious the crystal effect.
3. Mix the glue drops and transparent glue fully and evenly with a stirring rod or toothpick until there is no obvious color difference.
4. Sprinkle colored particles or beads into the mold, and you can choose the color and shape according to your own preferences.
5. Pour the mixed glue drops into the mold, and be careful not to pour them too full to avoid overflowing.
6. Heat the mold with a hot air gun or blower to speed up the solidification of the rubber droplets. Pay attention to keep a certain distance to avoid deformation or rupture due to overheating.
7. After the glue drops are completely solidified, you can carefully take the crystal glue water drops out of the mold.
8. If necessary, you can trim the edge of the crystal drop with scissors or a knife to make it more neat and beautiful.
9. The crystal drops can be used to make various handicrafts and decorations, such as mobile phone chains, necklaces and earrings.
Precautions:
1. Pay attention to safety in the production process, and avoid dripping glue splashing on skin or eyes.
2. Be careful when using hot air gun or hair dryer to avoid burns.
3. After the crystal drops are prepared, they should be placed in a ventilated and dry place to avoid direct sunlight, so as to avoid discoloration or deformation.
The above is a simple tutorial on making crystal drops, I hope it will help you. I wish you a beautiful crystal drop handicraft!