How to spell the channel name for the satellite pot cover?

After the upgrade of Zhongxing 99 satellite, some shanzhai phones can't be automatically upgraded when they are turned on. Just now, they were tested with a garbage Tiancheng machine. After turning on, they automatically searched to 39%, and then they crashed. The remote control failed to quit. Note that this is not a crash. Unplug the signal line, and the automatic search will be completed. Because there is no signal search, after the search, it shows that sets of TV + programs are found. At this time, the remote control can be used, and the receiver is in a state of no programs. Then,

1. You need to know which satellite you are going to receive, and what is the azimuth of the antenna at the place where you receive it? What is the elevation angle? Adjust the antenna to this position roughly.

2. Select the name of the satellite you want to receive on the receiver. After confirmation, select a channel, preferably a channel with strong signal. Generally, the receiver will store the program parameters on these satellites in advance. Select the information key on the remote control to see the quality of the satellite signal.

3. slowly adjust the azimuth and elevation of the antenna and the polarization angle of the tuner. Adjust patiently and look at the length of the signal quality bar. When the antenna is aligned, the signal quality will rise sharply, and the image and sound will jump out instantly.

4. Carefully adjust the azimuth angle, elevation angle and polarization angle of the tuner to maximize the signal quality, and fix the antenna.

5. Rescan all the programs on the satellite to store the latest program parameters in the receiver.