Core Tip: Manufacturing material: the barrel cover with a diameter of about 40MM is made of plastic, which can be made of No.3 strong horse thread or nylon thread. The size of the hook is optional, including a rotating hook, a pot bottom-shaped lead pendant and a small screw with a diameter of 2-3MM and a length of about 30 mm. The manufacturing method: punch five holes in the bottom of the barrel cover, with one hole in the middle, and other holes can be covered with lead pendant. There is a hole on the side of the barrel cover passing through the main line hanging ring, and the other ends of a pair of six hooks are knotted, so only one sleeve can be used to set screws. Punch holes in the middle of the lead pendant, and finally pierce holes such as screws from the mouth of the barrel cover. A hole in the side of the cover passes through the main line and is covered with screws. Finally, put the lead pendant on the screw and lie on the lead.
Manufacturing materials: the barrel cover with a diameter of about 40MM is made of new materials, and No.3 strong horse line or hook-breaking nylon line can be used. Hook sizes are optional, including a rotating hook, a pot bottom-shaped lead pendant and a small screw with a diameter of 2-3MM and a length of about 30 mm. ..
Production method: punch five holes in the bottom of the barrel cover, one hole in the middle, and the other holes can be covered with lead pendant. There is a hole on the side of the barrel cover passing through the main line hanging ring, and the other ends of a pair of six hooks are knotted, so only one sleeve can be used to set screws. Punch holes in the middle of the lead pendant, and finally, punch holes such as screws at the mouth of the barrel cover 40 mm. A hole in the side of the cover passes through the main line and is covered with screws. Finally, put the lead pendant on the screw and lie on the lead.
Its advantages are: saving bait, putting it upside down, reducing pollution, simple bait making and good bait atomization.