1. Method of tying the eight-character ring on the main line: First, prepare a main line and a special eight-character ring. These tools can be bought in shops selling fishing gear. First, tie a knot on the main line to form a knot, so that the main line can be divided into two parts. Then cut off a part of the shorter end, leaving only a short part. Then put this knot into the eight-character ring prepared before. At this point, rub the main line for about four or five times by hand, then thread it through and tighten it, and the eight-character ring is basically done.
2. Method of connecting the sub-line with the eight-character ring: When the sub-line is connected with the eight-character ring, it is basically the same as the main line. There is only one difference, that is, the number of turns when twisting the thread is different. Because the ends of the sub-wires are double-stranded, it is enough to rub the wires for two or three turns.
Second, the number of fishing lines generally selected is one model, and the choice of which type of fishing line needs to be adjusted according to the specific situation. If the fish to be caught is small, you can use a smaller fishing line, 1 and below is more suitable; If the fish to be caught is large, you need to choose a larger fishing line. In addition, the fishing line can be adjusted according to the size of the water area. Fishing in large waters requires a larger fishing line; On the contrary, you can choose a smaller fishing line.