2. The second step of desk assembly is the edge sealing of desktop board. The edge sealing of the desktop board should be based on the length of the desktop board, and the length and size should be guaranteed. Then glue and fix them separately. Nail it around the desktop with headless or flat-headed round nails, and all glue seams and diagonal seams should be sewn tightly.
3. The third step of desk assembly is line wrapping and edge treatment. Its covering line is to saw off the two ends of the four border slats under the tabletop at an oblique angle of 45 degrees, and ensure the length and size, and then stick the four edges under the tabletop. When the molding edge is processed, the surface that meets the requirements of the pattern will be milled on the milling machine.
The fourth step of desk assembly is to rest and assemble a single piece. Dressing is to polish the whole surface with sawdust and sandpaper to make it meet the requirements of surface quality and look more beautiful. But a single piece is to assemble two scraps and a kanban part into a single piece, which is more stable and beautiful.
5. Step 5, install the tripod. For tripods, two pieces need to be assembled with two other panels. After assembling the tripod, install the angle. Finally, put the bottom of the tabletop upward on the workbench, and connect the tripod with the tabletop with screws, and a complete desk is assembled successfully.